User Manual

80
Fire & Security Products
Siemens Building Technologies
03.2003
12.28 Simatrix
Code no. Code description Parameter
0 STATUS REQUEST
1 ACKNOWLEDGE
2 GENERAL RESET
3 CONNECT INPUT TO OUTPUT Input number (0-255), Output
number (1-127)
4 RESERVED
5 DEACTIVATE ALARM OUT PUT Alarm output (1 -255)
6 ACTIVATE ALARM OUTPUT Alarm output (1 -255)
7 SOFTWARE RESET
8 SET ALARM Alarm n. (1-255)
12.29 SI410
Code no. Code description Parameter
0 STATUS REQUEST
1 GENERAL ACKNOWLEDGMENT
2 GENERAL RESET
3 ACK PARTITION #partition, (1-16)
4 RESET PARTITION #partition, (1-16)
5 BYPASS #zone, (1-499)
6 BYPASS END #zone, (1-499)
7 INPUT/ZONE TEST #zone, (1-499)
8 INPUT/ZONE TEST END #zone, (1-499)
9 PARTITION OFF #partition, (1-16)
10 PARTITION ON #partition, (1-16)
11 PARTITION PARTIALLY SET #partition, (1-16)
12 PARTITION STATUS REQUEST #partition, (1-16)
13 ACTIVATE INPUT/ZONE #zone, (1-499)
14 DEACTIVATE INPUT/ZONE #zone, (1-499)
15 PULSE TO INPUT #zone, (1-499)
16 INTERNAL RESET FOR
“Local control” point
”Remote control” point
”System” point
4
5
6
17 ACTIVATE OUTPUT #output, (1-99)
18 DEACTIVATE OUTPUT #output, (1-99)
19 OUTPUT TEST #output, (1-99)
20 OUTPUT END TEST #output, (1-99)
21 CMS OFF #CMS, (1-2)
22 CMS ON #CMS, (1-2)