Instruction manual

Page 102 SITRANS LR 300 – INSTRUCTION MANUAL 7ML19985CL02
mmmmm
Appendix IV
Appendix IV
Process Pressure/Temperature de-Rating
Rod Antenna ANSI Hole Pattern, 150#
1, 2
1.
UHMW-PE antennas are rated to a maximum of 80°C (176°F) of continuous duty.
2.
Customer to provide adequate bolting to retain vessel pressure and provide sufficient
sealing.
WARNING: Never attempt to loosen, remove or disassemble
process connection or instrument housing while vessel contents
under pressure.
Process Configuration:
• 51003 with flange
series 22452.
• Flange will be
stamped 22452.
Process connection
tag will have the
series identified as
51003.
• Reference drawing
number is shown on
the process device
tag. This drawing can
be obtained on
request.
2” 3”
4” 6”
process temperature (°C)
pressure (bar, gauge)
SITRANS LR 300.book Page 102 Monday, June 10, 2002 7:18 PM