Instruction manual

7ML19985CL02 SITRANS LR 300 – INSTRUCTION MANUAL Page 21
mmmmm
Installation
Dimensions: Sliding Waveguide Configuration
Note: Please see next page for notes on process temperature and pressure
capabilities, as well as enclosure recommendations.
WARNING: The user is responsible for the selection of bolting and
gasket materials which will fall within the limits of the flange and
its intended use and which are suitable for the service conditions.
Note:
Always clamp the
instrument in the
same position for
operation: (see
P006 on page 57).
Sliding Flange
(See Flange Table
on page 26.)
Process
Device Tag
1000 mm (40.8")
131 mm
(5.16")
225 mm
(8.89")
325 mm
(12.8")
150 mm
(6")
200 mm
(8")
100 mm
(4")
SITRANS LR 300.book Page 21 Monday, June 10, 2002 7:18 PM