User Manual

1/2

Building Technologies 17-01-915 E.doc

Fire Safety & Security Products

Product data sheet ENGLISH

17-01-915

PED-category: IV

Safety valve

G ½, 90 bar

SIV-90

Index Description Date

Fluid-group: 2 01.12.09

Product line

Sinorix ™ H20 Gas

a additional info 21.01.13

b text update material 01.02.18

CX ref. no

0045

SAP

A5Q00039261

97/23/EG

Usage

For H20 Gas systems: - multi zone systems with selector valves in control pipe.

Technical data

type 10.1, BG I, head A , do 10mm, PN100, spring 104

response pressure 90 bar (@34°C)

secured by marked lead sealed

test certificate (response pressure) EN10204-3.1B (optional)

gas IG100 (N2)

G1 / G2 G ½ BSP

weight 1.1 kg

manual actuation with lever

fitting position vertical upright

direction of flow Arrow marked on valve body

(Inlet port G1)

min. flow diameter 10 mm

material

valve body W0.7043

cone, seat W1.4104

manual lever aluminium

spring stainless steel

Installation guideline

At multi zone systems fix the safety valve between water manifold and selector valves.

For connection an optional high pressure 90° joint can be used A5Q00041818.

SW32

200

PAGE 1
Product data sheet ENGLISH 17-01-915 PED-category: IV Fluid-group: 2 Product line Sinorix ™ H20 Gas CX ref. no Safety valve G ½, 90 bar SIV-90 SAP A5Q00039261 Index Description a b additional info text update material Date 01.12.09 21.01.13 01.02.18 0045 SW32 14 14 10 G1 26 34 G2 200 97/23/EG 40 Usage For H20 Gas systems: - multi zone systems with selector valves in control pipe.
PAGE 2
In and outlets are provided with protective caps. These are to be removed before the installation. The valves may not be thrown (leakage/failure in operation may result). The whole system has to be rinsed before installation of the valve! If the plant should not be sufficiently clean or in the case of an inappropriate assembly, the valve may be leaky already upon first response. The assembly of the threaded valves should be carried through without using hemp or PTFE-Tape.