Manualshelf

Installation Instructions

ManualsBrandsSiemens ManualsControl ValvesSKC Electronic Spring Return Valve Actuator w/ 1-1/2" Stroke (24 VAC)
12345678
Document No.129-368
Installation Instructions
September 25, 2018
Page 2 of 8 Siemens Industry, Inc.
Installation
If you are mounting an actuator on a new valve, begin
with the instructions in Figure 7.
Removing the Actuator from the Valve
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Preparation for Mounting an Actuator on a
Valve.
Figure 7. Preparing a New Valve.
NOTE: Install the stem heating element (P/N ASZ6.6),
if used, before proceeding to Figure 9.
Figure 8.