User Guide

SKPx5.xxxUxElectro‐hydraulicactuators TechnicalInstructions
 DocumentNumberCC1N7643us
 July25,2017
SiemensAGBuildingTechnologiesDivision Page5

Accessories



AGA22 Yellowsetpointspringfor6”to48”w.c.(1.5to10psiforSKP25.411U1)

AGA23 Redsetpointspringfor40”to100”w.c.(8.5to20psiforSKP25.411U1)

AGA25.2

DampingorificeformountingintoventconnectionofSKP25.0xxUxorSKP25.4xxUxmodels


AGA28 BlackbiasspringtoinstallifSKP25.0xxUxfor‐0.4"to0.4"w.c.isusedasproportionatororzero
governor

AGA29 Unpaintedsetpointspringfor0"to8.5"w.c.(includedinSKP25.0xxUxasstandard)

AGA66

SealinggaskettoprovideNEMA3,NEMA3R,andNEMA4protection.
GasketkittomountSKPxx.xxxUx
 PlacedbetweenactuatorSKPxx.xxxUxandvalveVGxxx.xxxUorvalveVRD40.xxxU
 IncreasesdegreeofprotectionfromIP54toIP65
 RefertoMountingInstructionM7643.2(7431904210)

AGA75.U1/4NPT

DampingthrottleforSKP55.xxxUx/SKP75.xxxUx,USthread¼“NP
T
 Optional,pipeconnectionfor6mm
 RefertoMountingInstructions431920780

AGA78

AirpressurereducingT‐fitting

AGA30.7

AdaptationtoSKP25.xxxUx
Formotorizedpressurecorrection
Siemenspartnumber:S55851‐Z401‐A100
SeeMountingInstructionsA5W00000658.

SAS...

MotorizedsetpointadjusterforSKP25.0xxUx
 For5.5mmstroke
 SeeDataSheetN4581andMountingInstructionsA5W00000658(M7643)