User guide

right page (83) of SL65 Iris en, A31008-H7700-A1-1-7619 (18.06.2004, 16:59)
©
Siemens AG 2003, U:\Siemens\ICM_MP_CCQ_S_UM_RUST\10210-001_vor-Ort-Einsatz\Produkte\SL65\output\FUG\en\SL65_CallSetup.fm
83Setup
VAR Language: en; VAR issue date: 040517
Setup Call setup
C ¢
T
¢Call setup
¢Select function.
Hide ID b
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify the conditions under
which calls should be diverted to
your mailbox or other numbers.
Status check
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and displayed.
Ö Condition set.
Õ
Not set.
Ô
Display if status is un-
known (e.g. with a new
SIM card).
Clear all
b
All set diversions are cleared.
Set up call divert (example)
The most common condition for call
divert is, for example:
Unanswered
b
I
Select Unanswered.
(Includes the conditions
Not reachable, No reply,
Busy, see below)
C Confirm.
Set Select.
C Confirm.
Ï
/
J
Select or enter the phone
number to which the calls
are to be diverted.
§Mailbox§ Use existing mail-
box phonenumbers, or
enter them if necessary.
C
Confirm. After a short
pause, the setting is con-
firmed by the network.