Owner manual

Calling26
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SL75_Hydra_1\out-
left page (26) of SL75 Hydra FUG, w/o ptt, en, A31008-H3300-A1-1-7619 (15.09.2005, 11:47)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Accept the waiting call in addition to
the first
§Swap§ Accept the waiting call
and place the current call
on hold.
Always proceed as above to swap
between the two calls.
Reject the waiting call
§Reject§ Press.
Or
§Divert§ The waiting call is divert-
ed, for example,
to mailbox (see page 75,
also Ring tones and silent
alert must be off).
Accept the waiting call and end the
current call
B
End the current call.
ð
Accept the new call.
End call(s)
B
Press briefly.
Or Close slider.
After the Return to held call? display,
you have the following choice:
§Yes§ You accept the call on
hold.
§No§ You end the second call
too.
Conference b
You can call up to 5 conference par-
ticipants one after the other and
then link them together in a confer-
ence call. Some of the functions de-
scribed may not be supported by
your service provider or may have to
be enabled specially.
A connection has already been
established:
§Options§ Open menu and select
Hold. The current connec-
tion is maintained.
H
/
J
Select phone number
from Contacts or enter it
manually.
When the new connec-
tion is established …
§Options§ … open the menu and se-
lect Conference. The held
call is joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
Ending
B
All calls in the conference
finish simultaneously
when the End key is
pressed.
Or Close slider.