%JTIXBTIFS SN… SX… VLHPHQV KRPH FRP ZHOFRPH HQ 2SHUDWLQJ LQVWUXFWLRQV 5HJLVWHU \RXU SURGXFW RQOLQH
6WDUW $ % & 5HVHW VHF
en Table of contents 8 Intended use . . . . . . . . . . . . . . ( Safety instructions . . . . . . . . . . Before you switch ON the appliance . . . . . . Delivery. . . . . . . . . . . . Installation. . . . . . . . . . In daily use . . . . . . . . . Door lock . . . . . . . . . . Damage . . . . . . . . . . . Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 .
en Intended use Terminating the programme . . . . . . . 27 Changing the programme. . . . . . . . . 27 Intensive drying. . . . . . . . . . . . . . . . . 27 2 Cleaning and maintenance . . . Overall condition of the machine Special salt and rinse aid . . . . . . Filters . . . . . . . . . . . . . . . . . . . . . Spray arms . . . . . . . . . . . . . . . . . 3 Fault, what to do? . . . . . . . . 8 Intended use dn en tI This appliance is intended for use in the home and domestic environments.
Safety instructions Keep children below the age of 8 years old at a safe distance from the appliance and power cable. Before you switch ON the appliance Please read the instructions for use and installation carefully. They contain important information on how to install, use and maintain the appliance. Retain all documents for later use or for the subsequent owner. You can download the instructions for use from our website free of charge.
en Safety instructions If the dishwasher is installed below or above other domestic appliances, follow the information for installation in combination with a dishwasher in the installation instructions for the particular appliances. Also follow the installation instructions for the dishwasher to ensure that all appliances are operated safely.
Safety instructions Childproof lock (door lock) * Do rlock The description of the childproof lock is at the back in the envelope. * depending on model Damage The appliance may be repaired and opened up by a technician only. To do this, disconnect the appliance from the power supply. Pull out the mains plug or switch off the fuse. Turn off the tap. If the appliance is damaged, especially the fascia (cracks, holes, broken buttons), or the door function is impaired, stop operating the appliance.
en Safety instructions m Warning Risk of explosion! Do not add any solvents to the washing chamber. Danger of explosion! m Warning Risk of scalding! Open the door carefully when the programme is still running. There is a risk of hot water spraying out of the appliance. m Warning Risks to children! If fitted, use the childproof lock. An exact description can be found in the back of the enve lope. Do not allow children to play with or operate the appliance.
Protection of the environment 7 Protection of the * Getting to know your environment onitceotPr het of Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials. Please dispose of the individual parts separated according to type. Please ask your dealer or inquire at your local authority about current means of disposal. Packaging All plastic parts of the appliance are identified with internationally standardised abbreviations (e.g.
en Water softening system/Special salt Appliance interior 1" Interior light * 1* Top basket 12 Knife shelf * 1: Tablet collecting tray 1B Top spray arm 1J Bottom spray arm 1R Dispenser for special salt 1Z Filters 1b Cutlery basket 1j Bottom basket 9" Dispenser for rinse aid 9* Detergent dispenser 92 Lock for detergent dispenser 9: Rating plate * depending on model Overview of menu The settings can be found in the individual chapters.
Water softening system/Special salt To change the setting: 1. Press programme button 3. Each time the button is pressed, the set value increases by one level; when the value of •:‹ˆ has been reached, the display jumps back to •:‹‹ (off). 2. Press START button `. The chosen setting has now been stored. 3. Close the door. en 1. Open the screw-type cap of the compartment 1R. 2. Fill the tank with water (only required when switching on the appliance for the first time). 3.
en Rinse aid Switching off salt refill indicator/water softening system 1. Open the dispenser 9" by pressing and lifting the plate on the cover. Switchingof watersofteni gsy tem If the salt refill indicator @ is impaired (e.g. when using combined detergents containing salt component), it can be switched off. Proceed as described under “Adjusting the water softening system” and set the value to •:‹‹. The water softening system and salt refill indicator are now switched off.
Utensils 1. Open the door. 2. Switch on ON/OFF switch (. 3. Hold down programme button # and press START button ` until •:‹.... is indicated on the digital display. 4. Release both buttons. The LED for button # flashes and the digital display h displays the factory setting •:‹…. 5. Press programme button # until the factory set value §:‹† is indicated on the digital display h. To change the setting: 1. Press programme button 3.
en Utensils Loading the dishwasher Cups and glasses 1. Remove large food remnants. It is not necessary to prerinse utensils under running water. 2. Place the utensils so that – they are secure and cannot tip over. – all utensils with their openings face down. – parts with curves or indentations are at an angle, thereby allowing water to drain. – does not obstruct rotation of the two spray arms 1B and 1J. Very small utensils should not be washed in the machine, as they may fall out of the baskets.
Utensils en Pans Cutlery basket Bottom basket 1j You should always place cutlery unsorted with the points downwards. To prevent injuries, place long, pointed implements and knives on the knife shelf. Tip Heavily soiled utensils (pans) should be placed in the bottom basket. The more powerful spray jet provides a better dishwashing result. Tip Other examples, such as the best way of loading your dishwasher, can be found on our homepage as a free download.
en Utensils Folding spikes * Knife shelf * * depending on model The spikes can be folded down to improve arrangement of pans, bowls and glasses. * depending on model Long knives and other utensils can be arranged horizontally. Foldingspikes Knifeshelf Adjusting the height of the basket * Adjustingtheheightofthebasket Small accessories holder * Smal ac es oriesholder * depending on model Light-weight plastic accessories, e.g. cups, lids, etc.
Detergent Top basket with side levers 1. Pull out the top basket 1* out. 2. To lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping. 3. To raise the basket, hold the basket on the sides of the upper edge and lift it up. 4. Before re-inserting the basket again, ensure that it is at the same height on both sides.
en Detergent Adding detergent 1. If the detergent dispenser 9* is still closed, press the lock 92 to open the detergent dispenser. Pour detergent into the dry detergent dispenser 9* only (insert tablet flat, not on its edge). Dosage: see manufacturer’s instructions on the packaging. The graduated detergent dispenser 9* helps you add the correct amount of powder or liquid detergent. Usually 20 ml–25 ml are adequate for normal soiling. If using tablets, one tablet is adequate. PO PO PO 2.
Detergent Combination detergent Apart from conventional detergents (Solo), a number of products are offered with additional functions. These products contain not only the detergent but also rinse-aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5in1, etc.), additional components such as glass protection or stainless steel cleaner. Combination detergents function only up to a specific degree of hardness (usually 21°dH). Over this limit salt and rinse-aid must be added.
en Overview of programmes / Overview of programmes m aogrm prseofw eviO rve The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia. Type of utensils Type of soiling pots and pans, non-sensitive utensils and cutlery Programme Possible additional options all Prerinse Clean 70° Intermediate rinse Final rinse 65° Drying all Is optimised according to the soiling with the aid of sensors.
Overview of programmes Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes receive the information for comparability tests (e.g. according to EN60436). These are the conditions for conducting the tests, however these are not the results or consumption values. Request by e-mail to: dishwasher@test-appliances.com The product number (E no.
en Additional options · Hygiene * 0 Additional options lonaitAdi Hygien sio n o t p * depending on model Additional options can be set with the buttons X. The temperature is increased during the cleaning process. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles. Ÿ Express Wash/ Speed Perfect/ (VarioSpeed) * Ï Intensive zone * Expres Wash/Spe dPerfect(VarioSpe d) This function can reduce the running time by approx.
Operating the appliance Switching on the appliance 1 Operating the appliance ngitaO rpe Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹…. Different influencing factors such as e.g. water temperature or line pressure may result in deviations.
en Operating the appliance Optical display while the programme is running * Opticaldisplaywhiletheprogram eisrun ing * depending on model While the programme is running, a light spot shines on the floor under the appliance door. Do not open the dishwasher door until the light point is no longer visible on the floor. If the door is not completely closed, the light spot flashes. * If the appliance is installed at eye-level, with flush furniture front, the light point is not visible.
Operating the appliance en Timer programming * End of programme * depending on model You can delay the start of the programme in 1-hour steps up to 24 hours. 1. Open the door. 2. Switch on ON/OFF switch (. 3. Press button P + until the digital display h jumps to œ:‹‚. 4. Press P + or – button until the displayed time corresponds with your requirements. 5. Press START button `, timer programming is activated. 6.
en Operating the appliance Automatic switch off after end of programme or interior light* Automaticswitchof /interiorlight * depending on model To save energy, the dishwasher can be automatically switched off 1 min or 120 min after the programme ends. The setting can be selected from ˜:‹‹ to ˜:‹ƒ. ˜:‹‹ Appliance does not switch off automatically. The interior light 1" comes on when the door is opened irrespective of whether the ON/OFF switch ( is switched on or off.
Operating the appliance en Interrupting the programme Changing the programme 1. Open the door. 2. Switch off ON/OFF switch (. The LEDs go out. The programme is saved. If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance. 3. To continue the programme, switch on the ON/OFF switch ( again. 4.
en Cleaning and maintenance 2 Cleaning and maintenance ngniaeCl nda A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Overall condition of the machine Check spray arm for grease and limescale deposits. If you find such deposits: Fill detergent dispenser with detergent. Start the appliance without utensils in the programme with the highest rinsing temperature.
Cleaning and maintenance en Filters Spray arms The filters 1Z keep large foreign objects in the rinsing water away from the pump. These foreign objects may occasionally block the filters. The filter system consists of a coarse filter, a flat fine filter and a microfilter. 1. After each washing cycle check the filters for residue. 2. Unscrew filter cylinder as illustrated and take out filter system.
en Fault, what to do? 3 Fault, what to do? ,tF ula w tha ot Experience has shown that you can rectify most faults which occur in daily operation yourself. This ensures that the machine is quickly available to you again. In the following overview you can find possible causes of malfunctions and helpful information for rectifying them. Note If the appliance stops during dishwashing or does not start for no obvious reason, first run the Abort programme function (Reset).
Fault, what to do? en Fault table Fault “Check water supply” display 8 lights up. Error code “:‹ˆ is lit. Error code “:‚ƒ is lit. Fault code “:‚… is lit. Fault code “:‚† is lit. Fault code “:‚‡ is lit. Error code “:ƒƒ is lit. Error code “:ƒ… is lit. Cause Supply hose kinked. Tap turned off. Tap jammed or calcified. Remedial action Install supply hose without kinks. Turn the tap on. Turn the tap on. Flow rate must be min. 10 l/min. when water supply is open. Filter in the water supply blocked.
en Fault, what to do? Fault Error code “:ƒ† is lit. Error code “:ƒˆ is lit. Cause Waste water pump blocked or cover on the waste water pump is not locked in position. Mains voltage too low. A different error code is indicated on the digital display. (“:‹‚ to “:„‹) A technical fault has probably occurred. p or • appears on the digital display h. Display flashes Not a fault! Door not closed properly. Refill indicator for salt @ No rinse aid. and/or rinse-aid H is lit. No salt.
Fault, what to do? Fault Utensils not dry. Cause No or too little rinse aid in the dispenser. Programme selected without drying. Water collecting in depressions on the utensils and cutlery. en Remedial action Refill rinse aid. Select programme with drying (see “Overview of programmes”, “Programme sequence”). Arrange utensils in a sloping position, arrange affected utensils as sloping as possible.
en Fault, what to do? Fault Food remnants on the utensils. Cause Utensils placed too closely together, utensils basket overfilled. Spray arm rotation obstructed. Spray arm nozzles are blocked. Filters 1Z dirty. Filters 1Z inserted incorrectly and/or not engaged. Rinse programme too weak. Utensils precleaned too intensely; sensors therefore decide on weak programme sequence. Stubborn soiling cannot be completely removed. Tall narrow receptacles in corner areas are not rinsed adequately.
Fault, what to do? Fault Water stains on plastic parts. en Cause Droplet formation on plastic surface is physically unavoidable. After drying, water stains are visible. Remedial action Use a more intensive programme (more water changes). Arrange utensils in a sloping position. Use rinse aid. If required, increase softening setting. Change detergent brand. Washable or water-soluble Detergent substances are coatings in the container or deposited. These coatings cannot Clean appliance mechanically.
en Fault, what to do? Fault Coloured (blue, yellow, brown), difficult to remove to non-removable coatings in the appliance or on stainless steel utensils. Coloured (yellow, orange, brown), easily removable deposits inside the appliance (mainly in the floor area) Discolouration of the plastic parts inside the appliance. Plastic parts discoloured. Removable streaks on glasses, glasses with metallic appearance and cutlery. 36 Cause Film formation consisting of ingredients from vegetables (e.g.
Fault, what to do? Fault Initial or existing, irreversible clouding of glass. Cause Glasses not dishwasher-proof, only suitable for dishwasher. Rust spots on the cutlery. Cutlery not adequately rustresistant. Knife blades are frequently more severely affected. Cutlery will also rust if rusting parts are rinsed at the same time (pan handles, damaged utensil baskets, etc.). Salt content in the rinsing water too high, as salt dispenser lock not fastened firmly or salt was spilled while being refilled.
en Fault, what to do? Fault Detergent residue in the detergent dispenser or in the tablet collecting tray. Cause Spray arms blocked by utensils, therefore detergent is not rinsed out. The detergent dispenser was damp when filled. Door not closed properly. Appliance stops in the programme or programme Do not place utensils or fragrance is interrupted. dispenser in the tablet collecting tray. Top basket presses against the door and prevents door from being closed securely.
Customer service 4 Customer service om C rteus 5 Installation and connection ecv ires If you are unable to rectify the fault, please contact your customer service. We always find a suitable solution, even to avoid unnecessary visits by technicians. Contact information for your nearest customer service can be found on the back of these instructions for use or on the enclosed customer service list. When calling, please state the appliance number (ENr.
en Installation and connection Delivery Installation Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order. This may cause small water stains. These will disappear after the first wash cycle. The required installation dimensions can be found in the installation instructions. Level the appliance with the aid of the height-adjustable feet. Ensure that the appliance is situated securely on the floor.
Installation and connection Water pressure: At least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead. Inlet rate: Minimum 10 litres/minute Water temperature: Cold water; hot water max. temperature 60 °C. Warm water connection * Warmwatercon ection * depending on model The dishwasher can be connected to cold or hot water up to max. 60 °C.
en Installation and connection Use only a residual current operated circuit-breaker which features the symbol ‚. Only this extension guarantees compliance with the currently valid regulations. The appliance features a water damage protection system. Please note the system will not function unless the power supply is connected. Removing the appliance Also observe the sequence of worksteps here. 1. Disconnect the appliance from the power supply. 2. Turn off the water supply. 3.
&KLOGSURRI ORFN GRRU ORFN :DUQLQJ $FWLYDWH WKH FKLOGSURRI ORFN 2SHQ WKH GRRU ZLWK DFWLYDWHG FKLOGSURRI ORFN 'HDFWLYDWH FKLOGSURRI ORFN $OZD\V FORVH WKH DSSOLDQFH GRRU FRPSOHWHO\ ZKHQ \RX OHDYH WKH DSSOLDQFH 7KLV LV WKH RQO\ ZD\ \RX FDQ SURWHFW \RXU FKLOGUHQ IURP SRWHQWLDO GDQJHUV %DNLQJ VKHHW VSUD\ KHDG /DUJH VKHHWV RU JULOOHV DQG SODWHV ZKLFK KDYH D GLDPHWHU JUHDWHU WKDQ FP JRXUPHW SODWHV SDVWD SODWHV GLQQHU SODWHV FDQ EH FOHDQHG ZLWK WKH DLG RI WKH VSUD\ KHDG 7R G
$48$ 6723 JXDUDQWHH HQ GRHV QRW DSSO\ WR DSSOLDQFHV ZLWKRXW $TXD 6WRS ,Q DGGLWLRQ WR ZDUUDQW\ FODLPV DJDLQVW WKH VHOOHU EDVHG RQ WKH SXUFKDVH FRQWUDFW DQG LQ DGGLWLRQ WR RXU DSSOLDQFH ZDUUDQW\ ZH ZLOO SD\ GDPDJHV XQGHU WKH IROORZLQJ FRQGLWLRQV ,I RXU $TXD 6WRS V\VWHP LV GHIHFWLYH DQG FDXVHV ZDWHU GDPDJH ZH ZLOO PDNH JRRG WKH GDPDJH IRU SULYDWH XVHUV 7R HQVXUH ZDWHU GDPDJH SURWHFWLRQ WKH DSSOLDQFH PXVW EH FRQQHFWHGWR WKH SRZHU VXSSO\ 7KLV OLDELOLW\ JXDUDQWHH LV YDOLG IRU WKH VHUYLFH OLIH R
