User Manual

USB Serial Network Card
5084
s Industry, Inc.
Building Technologies Division
s
Data Sheet
Fire Safety Products
Management Station
XNET Interface Card for Management Stations
Model SNC
Product Overview
The Serial Network Card (Model SNC) from Siemens
Fire Safety is a network card that is v2.0 USB-
compliant, and is used to connect a Siemens
Modular
| FireFinder and / or MXL panels with a
Siemens Management Stations, via X
NET
communications.
Manufactured to replace the Model NCC-2F card,
Model SNC optionally provides an interface to wide-
area network (WAN) components, including the
Siemens Model HUB-4 card over H
NET
communications.
One (1) Model SNC can provide connectivity to
either a X
NET or HNET network, while the use of two
(2) SNCs can connect to X
NET and HNET networks.
Similarly, one (1) Model SNC may also be used in a
Siemens Modular
| FireFinder and / or MXL panel
configuration with Model SNC housed inside the
Siemens Virtual Network Tunnel (VNT). This allows
for interfacing H
NET and XNET between multiple XLS
systems.
Model SNC provides an electrical isolation between
the Siemens Management Station PC and the actual
network.
Each Siemens SNC module fits in any available PCI
or PCI Express compliant slot. Model SNC is
independent of the slot connection, and the tab is
only used for additional support.
Note: Each Serial Network Card comes pre-installed
in Management Station computers.
Electrical Ratings
Input Voltage:
5V (from USB)
Input Current:
80mA, max.
Related Documentation
Product Data Sheet Number
NCCW7I7 Software 5068
Desigo® CC 5082
Cerberus® DMS 9300
Desigo Fire Safety Modular 7300
Cerberus PRO Modular
8300
HUB-4 5075
Details for Ordering
Model Part Number Description
SNC S54400-N1-A1
Serial Network Card used for
PC connectivity to Siemens
Management Stations
Universal Serial Bus (USB) v2.0 compliant
Replacement for the Model NCC-2F
Siemens interface card
Supports Style 4 XNET networks
Model HUB-4 card used for
H
NET communications
Fits in any available PCI or PCI Express
compliant slot
Card allows the PC to be a part of
the Siemens fire-panels’ network
(+) or (-) network ground-fault detection
ARCHITECT AND ENGINEER SPECIFICATIONS
UL864 9
th
Edition and UL1076 Listed
ULC-S527, 3
rd
Edition Listed

Summary of content (2 pages)