Environmental Declaration
EPD - Type II
Based on ISO 14021
Designation
Product line
Siemens Industry
Building Technologies
8 Fernwood Road
Florham Park, NJ 07932
Management System since by
ISO 9001 (Quality)
ISO 14001 (Environment)
XLS, NCC, GMS
Environmental
Product Declaration
Serial Network Card - USB to XNET/HNET communicationsType of equipment /
Product No.
SNC
Product
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Typical energy consumption 4kWh/a
Maintenance
Fire load 2MJ
3-PVC Clam Shell 45g
4-LDPE Bubble wrap 1g
Total weight of device 145g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PA66 TERM PLUG 5 POS 12g
PA66 PCB HEADER 5-POS 10g
PA66 2mm CONNR 5-POS 1g
Steel; zinc plated Screws 2g
Steel; zinc plated Faceplate 15g
5-wire 24AWG Cable / Wire 8g
MgZn ferrite EMI suppression FAIR-RITE 22g
FR4; halogen-free; solder SnAgCu SNC 75g
Comments
Not necessary
Product use
Plastics
5V * 0.08A = 0.4W
Materials
Packaging
Others
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding
disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Disposal
PCBAs (Printed Circuit Board
assembled)
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
Page 1/2