Operating instructions

246
syngo Vessel View
Editing & Merging Paths
Following segmentation of the aorta, the resultant
paths are shown as a list on the Measurement card.
You can edit the paths by repositioning the path points
along the path into the center of the vessel lumen.
You can also merge paths by selecting two paths from
the Measurement card at a time and clicking the
Merge button.
Measurements
Select the path of interest on the Measurement card.
Move the Focus Pointer, e.g. by dragging the green
vertical line in the Vessel Navigator.
The 3 MPR segments are now displayed orthogonal to
the path. These images will be updated as you change
the position of the Focus Pointer.
The following measurements can be performed:
1.Curved Distance directly in the Vessel Navigator
e.g. origins of the renal arteries to neck of the aneu-
rysm.
2.Curved Distance in the central long axis of the aneu-
rysm between the upper and lower necks of the
aneurysm.
3.Straight Distance for maximum diameter of the
aneurysm or any of the aortic branches, i.e. the iliac
arteries.
4.Automatic contouring and area calculation of the
lumen of the aneurysm or the aortic branches, i.e.
the iliac arteries.
5.Angle Measurement