Operating instructions

Specials
491
CARE Vision
Is a CT Fluoroscopic mode for interventions with 1 or 3
combined slices and up to 10 images per sec. displayed
(depending on the hardware configuration).
The Basics
Any of the predefined CARE Vision scan protocols can
be appended to a spiral protocol for interventional pro-
cedures, such as biopsies, abscess drainage, pain ther-
apy, minimum invasive operations, joint studies, and
arthograms.
The raw data will not be available for image recon-
struction. In case of the FoV must be changed due to
movement, insert a control scan by clicking on the
chronicle with the right mouse button.
You can “Append” any routine protocol after the inter-
ventional procedure for a final check and documenta-
tion, e.g. a short range of spiral scanning for the biopsy
region.
With gantry tilt 0° the table height can be adjusted to
minimum vertical position of 255 mm.
Automatic Patient Instruction (API) is not possible for
CARE Vision.
You can change the gantry tilt while the protocol is
loaded.