Operating instructions

Specials
501
Application Procedure
1.Load and scan a spiral protocol of the interested
body region.
2.Scroll through the images to define a target slice.
3.Click on “Same TP” under Table position, in the rou-
tine card. Move the table to the desired table posi-
tion.
4.Turn on the light marker on the Gantry to localize the
entry point, and then start patient preparation.
5.Open the Patient Model Dialog. Check the check-
box “Append”. Select one of the predefined “CAREVi-
sion” scan protocols under “Specials“ protocols and
then click “OK”.
6.Select the “HandCARE” position on the scan card.
7.Click “Load” and the “Cancel/Move” to scan on the
preselected table position.
8.Press the footswitch to start the Fluoroscopy.