Operating instructions

502
Specials
You can change
the following Scan
Parameters on the
examination taskcard
during radiation:
•Gantry Tilt
•Table position
•Table movement type
•Feed in/Feed out
Hints
• Press the footswitch either to position the needle or
to control the needle position.
• Without HandCARE every time you release the foot-
switch max. the last scanned 3 sec. of acquired
images are automatically saved to the local data-
base.
• With HandCARE every time you release the foot-
switch one image per rotation is automatically saved
to the local database.
• If CARE View is used, only the middle slice of the last
image is displayed after release of the footswitch.