User guide

6
User programming via the keypad
User Menus
18
Siemens AB
A6V10209178
Security Products
26.09.2011
 A 6 digit reset code displays on the top line.
2. Provide 6 digit code to installer.
3. Receive newly generated code from installer.
4. Enter new code at the AUTH CODE prompt.
5. Press SELECT.
 The message SYSTEM RESTORED displays on the top line of the display.
6.2 User Menus
1. Enter a valid User PIN.
2. Scroll to MENUS and press SELECT.
3. To select a programming option, use the up/down arrow keys or enter the digit
listed in the table below.
1
SYSTEM STATUS
Allows user to view the status of the following:
OPEN ZONES
ALERTS
ISOLATIONS
BATTERY
AUX
2
INHIBIT
Allows users to inhibit a zone.
3
ISOLATE
Allows users to isolate a zone.
4
SET DATE/TIME
Allows users to set the time and date.
5
TEST
Allows users to perform a BELL TEST, WALK TEST, WPA
TEST or change AUDIBLE OPTIONS.
6
EVENT LOG
Allows users to view a log of the most recent events on the
system.
7
ACCESS LOG
Allows users to view a log of the most recent access on the
system.
8
CHIME
Allows user to enable or disable chime function on all zones
where the chime has been programmed as an audible alert
feature.
9
USERS
Allows Manager type users to add, edit, and delete users.
10
CHANGE PIN
Allows users to change their user PIN..
11
SMS CONTROL
Allows users to configure SMS PIN.
12
SMS EVENTS
Allows users to set up the SMS service for sending short
text messages to mobile phones via the PSTN Line.
13
DOOR CONTROL
Allows the user to control doors. He can lock / unlock and
reset the door to normal operation.
14
GRANT ACCESS
Allows users to grant Engineer or Manufacturer access to
the system.
15
REPORT TO ENG
Allows the user to request that the last 10 events in the log
be sent to the engineer by SMS message. The 10 events
may require more than one SMS message, depending on