User guide

6
User programming via the keypad
User Menus
20
Siemens AB
A6V10209178
Security Products
26.09.2011
ZONES
Select the required zone and toggle the setting from NOT INHIBITED to
INHIBITED.
SYSTEM
Select the required system alert and toggle the setting from DISABLED to
ENABLED to inhibit it.
 MAINS FAULT
 BATTERY FAULT
 AUX FUSE FAULT
 EXT FUSE FAULTINT FUSE FAULT
 BELL TAMPER
 AUX 1 TAMPER
 AUX 2 TAMPER
 ANTENNA TAMPER
 MODEM 1 L FAULT
 MODEM 2 L FAULT
 XBUS CABLE FAULT
 FAIL TO REPORT
 PSU FAULT
XBUS
Isolate the desired alert from EXPANDERS or KEYPADS:
 XBUS COMMS LOST
 XBUS FUSE FAULT (Expanders only)
 X-BUS TAMPER
VIEW INHIBITS
To view a list of the inhibited zones, system alerts and X-BUS device alerts.
Only the ALARM, EXIT/ENTRY, FIRE EXIT and LINE zone types can be inhibited
on the SPC system. All other zone types are not displayed in the inhibit menus.
6.2.4 SET DATE/TIME
The date and time can be manually entered on the system. The time and date
information is displayed on the keypad and browser and is used on time-related
programming features.
1. Scroll to SET DATE/TIME and press SELECT.
 The date displays on the top line of the display.
2. To enter a new date, press the required numeric keys. To move the cursor to
the left and right, press the left and right arrow keys.
3. Press ENTER to save the new date.
 If an attempt is made to save an invalid date value, the text INVALID
VALUE is displayed for 1 second and the user is prompted to enter a valid
date.
4. To enter a new time, press the required numeric keys. To move the cursor to
the left and right, press the left and right arrow keys.
5. Press ENTER to save the new time.
 If an attempt is made to save an invalid time value, the text INVALID
VALUE is displayed for 1 second and the user is prompted to enter a valid
time.