Specifications

15
Engineer programming via the browser
USB interface
118
Siemens AB
A6V10276959
Security Products
18.11.2011
15.2 USB interface
If the panel is reset while the USB cable is connected, the cable must be
unplugged and plugged in again.
The USB port on the controller connects to a PC via a standard USB type A to type
B cable. Drivers must be installed to make a USB connection from the controller to
the PC:
For Windows XP and 2000, install using the CD and the following steps:
1. Connect the USB cable from the controller to a USB interface on the PC.
2. Confirm the correct communication port.
 The Found New Hardware wizard is displayed.
3. Press Cancel on the Found New Hardware Wizard.
If there are 2 devices, cancel both Wizards before proceeding.
4. Double click the SPC.exe install file to launch installation wizard.
 A dialog box regarding Windows certification appears. Siemens deems this
acceptable to continue. For further queries, please contact network
administrator or a Siemens technician.
5. Click Continue Anyway.
6. At the end of the installation process, a window indicates that the installation
process is complete.
7. Click Finish.
For Windows Vista, users with administration privileges can install using the SPC
CD and the following steps:
1. Double click the SPC.exe install file.
 The installation Wizard appears.
2. Proceed with the wizard instructions.
 At the end of the installation process, a window indicates that the
installation process is complete.
3. Click Finish.
4. Connect the USB cable from the controller to a USB interface on the PC.
When installing, the user must have administration rights in order for installing on
the Windows Vista platform.
Using the Start command, set up the new connection on the PC:
1. Select Connect To > Show All Connections > Create A New Connection.
2. On the following window, select Setup an advanced Connection.
3. On the following window, select Connect Directly to another computer.