Specifications

Engineer programming via the browser
15
Users
133
Siemens AB
A6V10276959
Security Products
18.11.2011
User Profile
Default
User type
Description
open zone as the fault or open condition is displayed
on the keypad each time the system is being set to
remind the user to attend to that zone.
Change PIN
Standard
Manager
This menu option allows users to change their user
PINS [➙ 109].
Engineer
Manager
This option allows users to grant access to engineer
programming.
For Swiss CAT 1 and CAT 2 regional requirements,
when Engineer Access is granted, all areas must be
unset otherwise the engineer will be denied access.
Set Date /
Time
Standard
Manager
Use this menu option to program the time and date on
the system [➙ 114].
Ensure the time and date information is accurate; these
fields are presented in the event log when reporting
system events.
Bell Test:
Standard
Manager
User can perform a bell test to test the external bells,
strobe, internal bells and buzzer to ensure their correct
operation.
Walk Test
Standard
Manager
User can perform a walk test to allow for testing of the
operation of all alarm sensors on a system.
WPA Test
Standard
Manager
User can test a WPA.
View Log
Standard
Manager
This menu option displays the most recent event on the
keypad display. The event log [➙ 109] details the time
and date of each logged event.
Chime
Standard
Manager
All zones that have the CHIME attribute set generate a
short burst of audible tone on the keypad buzzer when
they are opened (while the system is unset).
This menu option allows for enabling or disabling of the
chime feature on all zones.
SMS
Standard*
Manager
This feature allows users to set up the SMS messaging
service if a modem is installed on the system.
Users
Manager
User can configure user on the panel.
Delay Auto Set
Standard*
Manager
User can delay or cancel autosetting..
Bypass Unset
Delay
Standard
Manager
User can automatically override the Unset Delay. Only
available for Financial installations. See
Setting/Unsetting [➙ 170]
Upgrade
Manager
User can grant manufacturer access to panel to
perform firmware upgrade.
X-10
Standard
Manager
Access Control
User can activate/deactivate configured X-10 devices.
Door Control
Standard*
Manager
Access Control
User can lock/unlock doors.