Specifications

15
Engineer programming via the browser
File Operations
146
Siemens AB
A6V10276959
Security Products
18.11.2011
 The Fast Programmer is now connected to the controller.
To remove the Fast Programmer - gently pull the device out of the Fast
Programmer interface.
15.6.3.2 Installing the Fast Programmer on a PC
For Windows XP and 2000
1. Connect the USB cable from the controller to a USB interface on the PC.
2. Confirm the correct communication Port.
 The Found New Hardware wizard is displayed.
3. Press Cancel.
If there are 2 devices, cancel both Wizards before proceeding.
4. Double click the file SPC.exe.
 A dialog box regarding Windows certification appears. Siemens deems this
acceptable to continue. For further queries, please contact network
administrator or a Siemens technician.
5. Click Continue Anyway.
 At the end of the installation process, a window indicates that the
installation process is complete.
6. Click Finish.
For Windows Vista
 You have administration privileges.
1. Double click the file SPC.exe.
 The installation wizard appears.
2. Proceed with the wizard instructions
3. At the end of the installation process, a window indicating that the installation
process is complete.
4. Click Finish to confirm the completion of the installation.
 The SPC Fast Programmer is now installed on the PC. The configuration
files can be accessed only by running the SPC Pro programming
application
5. Plug the Fast Programmer into the USB port.