Specifications

15
Engineer programming via the browser
Changing system settings
150
Siemens AB
A6V10276959
Security Products
18.11.2011
To upload a configuration file from the Fast Programmer to the SPC, enter the file
name in the file name box and click Upload.
For complete details on using the Fast Programmer with SPC Pro, consult the SPC
Pro Configuration Manual .
Upgrading Firmware
NOTICE
Manufacturer Access is required for firmware operations.
A list of the firmware files stored on the Fast Programmer is displayed.
To upgrade firmware, click on the Upgrade button beside the required firmware file.
15.7 Changing system settings
15.7.1 Identification
1. Select Settings > System > Identification.
 The following window will be displayed.
2. Configure the fields as described in the table below.
Installation ID
Enter a unique number for each installation This number identifies the installation (1
– 999999).