Specifications

Technical Data
4
SPC4000
19
Siemens AB
A6V10276959
Security Products
18.11.2011
4 Technical Data
4.1 SPC4000
Programmable areas
4
Max. number of user codes
32
Remote controls
Up to 32 (1 per user)
Wireless Panic Alarm
Up to 32
Event memory
1'000 intrusion events, 1'000 access events
Number of on-board zones
8
Max. number of hardwired zones
32
Max. number of wireless zones
32 (take away wired zones)
EOL resistor
Dual 4k7 (default), other resistor combinations
configurable
Number of on-board relays
1 strobe (30 VDC / 1 A resistive switching current)
Number of on-board open coll.
2 internal / external bell, 3 freely programmable (each
max. 400 mA resistive switching current, supplied via
auxiliary output)
Firmware
V3.x
Door capacity
Max. 4 entry doors or 2 entry/exit doors
Number of card reader
Max. 4
Radio module
SPC4221: integrated SiWay RF receiver (868 MHz)
SPC4320.220: Optional (SPCW111),
SPC4320.320: Optional (SPCW110)
Verification
4 verification zones with max. 4 IP-cameras and 4 audio
devices.
Video
Up to 16 pre / 16 post event images (by JPEG resolution
320 x 240, max. 1 frame / sec.)
Audio
Up to 60 sec. pre / 60 sec. post audio recording
Field bus 1)
X-BUS on RS-485 (307 kb/s)
Number of field devices 2)
Max. 11 (4 keypads, 4 door-expanders, 5 input/output
expanders)
Connectable field devices
Keypads: SPCK42x, SPCK62x
Door expanders: SPCA210, SPCP43x
Expanders with I/O: SPCE65x, SPCE45x, SPCP33x,
SPCE110, SPCE120, SPCV32x
Interfaces
1 X-BUS (1 spur),
1 RS232 (to X-10 controller),
1 USB (PC connection),
1 SPC Fast Programmer,
SPC43xx: Additionally 1 Ethernet (RJ45)
Tamper contact
Front spring tamper, 2 auxiliary tamper contact inputs