Specifications

15
Engineer programming via the browser
X-BUS
202
Siemens AB
A6V10276959
Security Products
18.11.2011
Editing Zones/Outputs for a Door I/O
1. Select a Zone/Output for the door I/O.
2. Click the Edit button.
3. The 2 inputs and the output belonging to this door I/O can be configured as
normal door inputs and outputs. See page [➙ 177].
4. In order to use the inputs, they have to be assigned to a zone number.
15.10.4 Cable Map
For a list of the expanders/keypads in the ordered they are configured on the SPC
system:
 Select Settings > Exp./Keypads > Cable Map.
 The following window will be displayed:
For more detail on X-BUS interfacing, see page [➙ 40].
15.10.5 Settings
To configure X-BUS connections:
1. Select Settings > Exp./Keypads > Settings.
 The following window will be displayed.
2. Configure the fields as described in the table below.