Camera Accessories User Manual

ManualsBrandsSiemens ManualsCamera AccessoriesSpectrodensitometer FD-5

Certificate No : JQA-E-80027

Registration Date : March 12, 1997

Certificate No : LRQ 0960094/A

Registration Date : March 3, 1995

For correct use and for your safety, be sure to read the instruction

manual before using the instrument.

Always connect the instrument to the specified power supply

voltage. Improper connection may cause a fire or electric shock.

SAFETY PRECAUTIONS

9242-4897-10 BCJEPK 5

• Displays shown are for illustration purpose only.

• The speciﬁ cations and drawings given here are su

bject to change without prior notice.

• KONICA MINOLTA and the Konica Minolta logo and the symbol mark, and "Giving Shape to

Ideas" are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC.

• The basICColor logo is a registered trademark of basICColor GmbH.

• Other company names and product names used herein are trademarks or registered trademarks

of their respective companies.

DIMENSIONS

(Units: mm)

With removable target mask attached

171.5

165

84.2

φ6.2

Streamlines color adjustment

in printing, even on substrates

with  uorescent whitening agents

Density

Color

Illumination

Spectrodensitometer

7/FD

3-in-1 next-generation measurement tool

Main speciﬁ cations

Model FD-7 FD-5

Illumination/viewing system

45°a: 0°(annular illumination)



Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition a for reﬂ ectance measurements.

Spectral separation device Concave grating

Wavelength range

Spectral reﬂ ectance: 380 to 730 nm; Spectral irradiance: 360 to 730

Spectral reﬂ ectance: 380 to 730 nm

Wavelength pitch 10 nm

Half bandwidth Approx. 10 nm

Measurement area Ø3.5mm

Light source LED

Measurement range Density: 0.0D to 2.5D; Reﬂ ectance: 0 to 150%

Short-term repeatability

Density:

0.01D

Colorimetric: Within

σΔ

E00 0.05 (When white plate is measured 30 times at 10-second intervals after white calibration has been performed)

Inter-instrument agreement

Within

E00 0.3 (Average of 12 BCRA Series II color tiles compared to values measured with a master body under Konica Minolta standard

conditions)

Measurement time Approx. 1.4 s (single-point reﬂ ectance measurement)

Displayed values

Colorimetric values, color-difference values, density values,

density-difference values, dot area ratio, dot gain, PASS/FAIL

judgment, illuminance, correlated color temperature

Colorimetric values, color-difference values, density values, density-

difference values, dot area ratio, dot gain, PASS/FAIL judgment

Measurement conditions

Corresponding to ISO 13655 Measurement Conditions M0 (CIE Illuminant A), M1 (CIE Illuminant D50), and M2 (illumination with UV-cut

ﬁ lter); User-deﬁ ned illuminant

Illuminants A, C, D50, D65, ID50, ID65, F2, F6, F7, F8, F9, F10, F11, F12, User-deﬁ ned illuminant

Observers 2° Standard Observer, 10° Standard Observer

Color spaces L



, L



h, Hunter Lab, Yxy, XYZ and color-difference in these color spaces

Color-difference equations



ab (CIE 1976),



94 (CIE 1994),

E00 (CIE 2000),

E (Hunter), CMC (l:c)

Indexes WI (ASTM E313-96); Tint (ASTM E313-96); ISO Brightness (ISO 2470-1); D65 Brightness (ISO 2470-2); Fluorescence index

Density ISO Status T, ISO Status E, ISO Status A, ISO Status I; DIN16536

Storable data Colorimetric target data: 30 data; Density target data: 30 data

Display language English, French, German, Spanish, Japanese, Chinese (Simpliﬁ ed)

Scanning measurements



Scanning measurement of a color chart can be performed. N/A

Interface USB 2.0

Output data



Displayed values; Spectral reflectance data; Spectral irradiance

data

Displayed values

Power Rechargeable internal lithium-ion battery (Number of measurements per charge: Approx. 2,000 when new); AC adapter; USB bus power

Dimensions (W × D × H) 70 × 165 × 83mm (Body only); 90 × 172 × 84mm (With target mask attached)

Weight Approx. 350g (Body only); Approx. 430g (With target mask attached)

Operating temperature/

humidity range

10 to 35°C, 30 to 85% relative humidity with no condensation

Storage temperature/humidity

range

0 to 45°C, 0 to 85% relative humidity with no condensation



1 Illumination for wavelengths under 400nm is unidirectional.



2 Available when using PC software.

Summary of content (3 pages)

PAGE 1
Spectrodensitometer Main speciﬁcations Model FD-7 FD-5 45°a: 0°(annular illumination) Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition a for reflectance measurements. Concave grating Spectral reflectance: 380 to 730 nm; Spectral irradiance: 360 to 730 Spectral reflectance: 380 to 730 nm nm 10 nm Approx. 10 nm Ø3.5mm LED Density: 0.0D to 2.5D; Reflectance: 0 to 150% Density: σ0.01D Colorimetric: Within σΔE00 0.
PAGE 2
3-in-1 lightweight, handheld spectrodensitometer that measures color, density, and illumination. An ideal instrument for the printing and digital-imaging industries. Lab Lv, Tcp (Color temperature) CMYK Density Color Uniquely corresponds to Measurement Condition M1 of ISO 13655 The world's first M1 type. Konica Minolta's original VFS (Virtual Fluorescence Standard) technology enables Lab measurements corresponding to ISO 13655 Measurement Condition M1 (CIE Illuminant D50).
PAGE 3
Color Management Software NEW XY Automatic Color-Measurement Stage ColorScoutA3 + (Optional accessory) basICColor catch all (Optional accessory) For major efficiency increases in daily color control work. Enables color reproduction closer to visual evaluation with simple operation.  With basICColor catch all, commonly used templates and jobs are already included, so there is no need for measurement preparations such as setting target values, tolerances, etc.