User Manual

en Troubleshooting
46
Fault Cause troubleshooting
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
9. Check the water connection for
leaks.
10. Restore the power supply.
11. Switch the appliance on.
E:92-40 will light up altern-
ately.
Filters are soiled or blocked.
▶
Clean the filters.
→"Cleaning filters", Page41
E:61-03 will light up altern-
ately. Water is not drained.
Wastewater hose is blocked
or kinked.
1. Reposition the wastewater hose
without kinks.
2. Remove residues.
Siphon connection is still
sealed.
▶
Check the connection to the siphon
and open if necessary.
Cover of the wastewater
pump is loose.
▶
Secure the cover of the "Wastewa-
ter pump " →Page56 so it clicks
into position.
E:61-02 will light up altern-
ately.
Wastewater pump is
blocked.
▶
Clean the wastewater pump.
→"Clean wastewater pump",
Page56
Cover of the wastewater
pump is loose
▶
Secure the cover of the "Wastewa-
ter pump " →Page56 so it clicks
into position.
E:90-01 will light up altern-
ately.
Mains voltage is too low. This is not a fault on the appliance.
1. Contact an electrician.
2. Have the mains voltage and elec-
trical installation checked by an
electrician.
A different error code ap-
pears in the display window.
E:01-00 to E:90-10
A technical fault is present. 1. Press .
2. Unplug the appliance or switch off
the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press ⁠.
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact "Customer Service"
→Page57 and give the er-
ror code.