User's Manual

LOGO! functions
4.4 Special functions list - SF
LOGO!
Manual, 04/2011, A5E03556174-01
185
4.4.11 Weekly timer
Short description
The output is controlled by means of a configurable on/off date. The function supports any
combination of weekdays. You select the active weekdays by hiding the inactive days.
Note
Because LOGO! 24/24o does not have a real-time clock, the weekly timer function is not
available for both versions.
Symbol in LOGO!
0BA6
Wiring Description
Cam parameters
1, 2, and 3
At the Cam parameters, you set the on- and off-times of the
weekly timer for each Cam switch. Here you also configure
the days and the time-of-day.
Par You specify whether the timer pulses on for one cycle when
activated and then reset. The pulse setting applies to all three
cams.
4
1R
1R
1R
3DU
Output Q Q is set when the configured cam is actuated.
Symbol in LOGO!
0BA7
Wiring Description
Cam parameters
1, 2 and 3
At the Cam parameters, you set the on- and off-times of the
weekly timer for each Cam switch. Here you also configure
the days and the time-of-day.
You can also specify whether the timer pulses on for one
cycle when activated and then reset. The pulse setting
applies to all three cams.
4
3DU
Output Q Q is set when the configured cam is actuated.
Timing diagram (three examples)


4



6XQGD\
7KXUVGD\
)ULGD\
6DWXUGD\7XHVGD\
:HGQHVGD\0RQGD\
&DP
&DP 'DLO\ KWRK
&DP 7XHVGD\ KWRK
&DP 6DWXUGD\DQG6XQGD\ KWRK