User's Manual

Configuring LOGO!
7.2 Setting the default values for LOGO!
LOGO!
Manual, 04/2011, A5E03556174-01
297
To set the backlight choice in programming mode:
You can set the default value for the backlight in programming mode only.
1. In the main menu, select "
①" : Press or

6WDUW
!6HWXS
&DUG
3URJUDP
2. Confirm "
①" : Press OK

%0$,180
0HQX/DQJ
/&'
!&ORFN
3. Select "
②": Press or
4. Confirm "
②": Press OK

%DFN/LJKW
!&RQWUDVW
5. Select "
③": Press or
6. Confirm "
③": Press OK


$OZD\V2Q
GHIDXOW
7. Move the cursor to "
④" or "⑤": Press or
8. Confirm "
④" or "⑤": Press OK
The default is that the backlight is not on. To set the backlight to always be on, select "
④".
Note: The backlight lifetime of the LOGO! TD is 20,000 hours.