Synco-Gamma Application Guide Retirement and nursing homes www.siemens.
Enhanced energy efficiency in retirement and nursing homes – with Synco and GAMMA building systems Requirements Retirement and nursing homes require special technical solutions. What is needed are low construction costs, a high level of flexibility to be able to easily rearrange spaces, economical operation, safety and comfort. The buildings must ensure optimum working and living conditions, low energy consumption, safe operation, protection from damage, and security in emergency situations.
Sales arguments Sales arguments Integrated room-primary application: Siemens offers an integrated application solution for small and mediumsize retirement and nursing homes which also includes the primary HVAC control part – a fully integrated and tested solution with products from a single source. Energy savings through individual room temperature control: Due to individual room control, up to 30% heating and/or cooling energy can be saved.
Overview Overview All applications shown on the following pages refer to living rooms which can be met in retirement and nursing homes. The applications focus on maximum comfort, safety and energy efficiency. The operating and monitoring devices are selected to simplify reading of the displayed information and operating the functions via large push buttons. The presence detector in the bath room switches the lighting automatically.
Room usage scenarios / Control of HVAC, lighting and blinds Room usage scenarios For living rooms in retirement and nursing homes following usage scenarios are supposed to be probable: HVAC This could be a possible HVAC scenario: In the cold season the room temperature is increased at 6.00 – controlled by a time schedule – to the Precomfort temperature setpoint (20 °C) and reduced again at 21.00 to the Economy temperature level (18 °C).
Documentation Heating control Demand-compensated boiler temperature control with controlled maintained boiler return temperature · Demand-compensated boiler temperature control · Controlled maintained boiler return temperature with mixing valve · Control of a boiler pump according to boiler operating mode · Control of a single-stage or 2-stage burner · Control of the boiler temperature via modulating burner with DC 0…10 V control HB0001 H6B HQ Cooling control CBA001 U2B HQ Demand-dependent flow temperat
Documentation Control of blinds B00003 AP2 HQ B00002 AP2 HQ A weather station outside of the building protects up to 8 facades against excessive solar irradiance in the summer. This function helps keep office rooms cool. The weather station also protects the blinds from damage caused by storms or other natural influences and controls it according to a time schedule and temperature to save heating energy during winter nights.
Documentation Functional description Description of the functions Individual room temperature control Control of blinds The room temperature controller controls the radiator valve resp. the chilled ceiling valve directly or via KNX bus and actuator. The control signal is not only sent to the actuator but also to the central control unit (RMB) as a heating or cooling demand signal. The weather station (AP 257/22) with integrated GPS receiver offers efficient control to protect facades from the sun.
Documentation Documentation Secondary documentation The following application sheets describe individual controller applications with more specific information. They can be downloaded from the internet: www.siemens.com/hit or via the „Siemens Download Center“ (iOS and Android App available) Application number Title Product no.
Application Guide No 1a Living room Synco™ & Gamma Electrical panel installation, with display and operation of temperature Highlight · Room thermostat with large display, integrated actuator and digital inputs Room setup Device list Variants · 1 - RDG100KN, Room thermostat: The RDG100 measures the room temperature and controls the radiator and the cooling ceiling. A heating/cooling demand is automatically sent to the primary controller.
Application Guide No 1b Living room Synco™ & Gamma Electrical panel installation, with display and operation of temperature Highlight · Operation of HVAC, lighting and blinds at one single device Room setup · 1 - QMX3.P37, Room unit with room temperature controller: Measures and controls the room temperature and sends the control signal to the valve actuator.
Application Guide No 1b Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no. 1 QMX3.
Application Guide No 1c Living room Synco™ & Gamma Electrical panel installation, no display and operation Highlight · Flush mounted room temperature sensor with integrated controller and digital inputs Room setup · 1 - AQR2532 Flush-mount room sensor with AQR2570 base module: The AQR measures and controls the room temperature.
Application Guide No 1c Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no.
Application Guide No 2a Living room Synco™ & Gamma Ceiling or under floor mounting, with display and operation of temperature Highlights · · Room control box, the modular system in the room automation Room thermostat with large display, integrated actuator and digital inputs Room setup · 1 - RDG100KN, Room thermostat: The RDG100 measures the room temperature and controls the radiator and the cooling ceiling. A heating/cooling demand is automatically sent to the primary controller.
Application Guide No 2a Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no.
Application Guide No 2b Living room Synco™ & Gamma Ceiling or under floor mounting, no display and operation Highlights · · Room control box, the modular system in the room automation Room thermostat with large display, integrated actuator and digital inputs Room setup · 1 - AQR2532 Flush-mount room sensor with AQR2570 base module: The AQR measures and controls the room temperature.
Application Guide No 2b Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no.
Application Guide No 3a Living room Synco™ & Gamma Flush mounting and radio communication, with display and operation of temperature Highlights · · · Operation of HVAC, lighting and blinds at one single device Decentral flush mounting actuators and KNX interfaces Central Operation via Synco living central apartment unit Room setup · 1 - QMX3.P37, Room unit: Measures the room temperature and sends the value to the central apartment unit.
Application Guide No 3a Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no. 1 QMX3.
Application Guide No 3b Living room Synco™ & Gamma Flush mounting and radio communication, with or without display and operation of temperature Highlights · · Flush mounting actuators and KNX interfaces Central Operation via Synco living central apartment unit Room setup · 1 - QAA910, Synco living Room temperature sensor: Measures the room temperature and sends the data to the central apartment unit. · 2 - QAX913, Synco living central apartment unit: Central control via radio signal for 12 rooms.
Application Guide No 3b Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no.
Application Guide No 3c Living room Synco™ & Gamma Flush mounting and radio communication, with display and operation of temperature Highlights · · Flush mounting actuators and KNX interfaces Central Operation via Synco living central apartment unit Room setup · 1 - QAA910, Synco living Room temperature sensor: Measures the room temperature and sends the data to the central apartment unit. · 2 - QAX913, Synco living central apartment unit: Central control via radio signal for 12 rooms.
Application Guide No 3c Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no.
Application Guide No 4a Living room Synco™ & Gamma Flush mounting, with display and operation of temperature Highlights · · Operation of HVAC, lighting and blinds at one single device Flush mounting actuators and KNX interfaces Room setup · 1 - QMX3.P37, Room unit with room temperature controller: Measures and controls the room temperature and sends the control signal to the valve actuator.
Application Guide No 4a Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no. 1 QMX3.
Application Guide No 4b Living room Synco™ & Gamma Flush mounting, with display and operation of temperature Highlights · · Room thermostat with large display, integrated actuator and digital inputs Flush mounting actuators and KNX interfaces Room setup · 1 - RDG100KN, Room thermostat: The RDG100 measures the room temperature and controls the radiator and the cooling ceiling. A heating/cooling demand is automatically sent to the primary controller.
Application Guide No 4b Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no.
Application Guide No 4c Living room Synco™ & Gamma Flush mounting, no display and operation Highlights · · Flush mounting room temperature sensor with integrated controller and digital inputs Flush mounting actuators and KNX interfaces Room setup · 1 - AQR2532 Flush-mount room sensor with AQR2570 base module: The AQR measures and controls the room temperature.
Application Guide No 4c Living room Synco™ & Gamma Device list Variants Key Product no. and description Stock no.
Application Guide No 5 Floor management station Synco™ & Gamma Central functions for multiple rooms, floor or the whole building Highlights · · Heating/cooling demand collection and forwarding of the total demand to the primary heating and cooling plant Remote operation and monitoring of the rooms and the primary HVAC plant Building setup · 1 - QAX913, Synco living central apartment unit: The QAX controls via manual operation or via individual time programs the room operating modes and the setpoints
Application Guide No 5 Floor control station Synco™ & Gamma Device list Optionen Variants Key Product no. and description Stock no. 1 AP 257/22 Weather station GPS 5WG1 257-3AB22 2 RMB795B Central control unit S55370-C162…C167 3 OZW772.x Web server OZW772.x 4 UP 588 Colour touch panel 5WG1 588-1ABx3 5 N 125/x2 Power supply unit 5WG1 125-1ABx2 Key Product no. and description Stock no.
Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel +41 41 724 24 24 Siemens Building Technologies Brunel House Sir William Siemens Square, Frimley Camberley Surrey, GU16 8QD United Kingdom Tel +44 1276 696000 Siemens Ltd Building Technologies Division 22/F, AIA Kowloon Tower, Landmark East 100 How Ming Street Kwun Tong, Hong Kong Tel +852 2870 7888 The information in this document contains general descriptions of technical options avai