User Manual

Application Guide

No 1a

Living room

Synco

™

& Gamma

Electrical panel installation

with display and operation of temperature

Highlight

· Room thermostat with large display, integrated actuator and digital inputs

Room setup

· 1 - RDG100KN, Room thermostat: The RDG100 measures the room temperature and controls the

radiator and the cooling ceiling. A heating/cooling demand is automatically sent to the primary controller.

· 2 - UP 258D11, Presence detector: The UP 258 detects the room occupancy and measures the

brightness. These data are forwarded to the room thermostat and the combi switching actuator.

· 3 - N 502/02, Combi switching actuator: The N 502 has 8 binary inputs and 8 relay outputs to connect

push buttons and lights. He receives control signals from the presence detector and switches the lights

accordingly.

· 4 - N 523/02, Venetian blind switch: The N 523 is being operated via push buttons or from a central

location via KNX or IP.

Device list Key Product no. and description Stock no.

1 RDG100KN Room thermostat S55770-T163

2 UP 258D11 Presence detector 5WG1 258-2DB11

3 N 502/02 Combi switching actuator 5WG1 502-1AB02

4 N 523/02 Venetian blind switch 5WG1 523-1AB02

5 UP 258 Motion detector DELTA i-system 5WG1 258-2HB12

6 STA23 Elektrothermal actuator S55174-A101

7 S 290 Door/window contact 5WG1 290-7AB11

Variants Key Product no. and description Stock no.

1a RDG160KN Room thermostat S55770-T297

2a UP 258E21 Presence detector with constant light control 5WG1 258-2EB21