User Manual

Application Guide

No 2a

Living room

Synco

™

& Gamma

Ceiling or under floor mounting, with display and operation of tempera-

ture

Highlights

· Room control box, the modular system in the room automation

· Room thermostat with large display, integrated actuator and digital inputs

Room setup

· 1 - RDG100KN, Room thermostat: The RDG100 measures the room temperature and controls the

radiator and the cooling ceiling. A heating/cooling demand is automatically sent to the primary controller.

· 2 - UP 258D11, Presence detector: The UP 258 detects the room occupancy and measures the

brightness. These data are forwarded to the room thermostat and the binary output.

· 3 - AP 641, Room Control Box: The AP 641 includes the universal dimmer RS 525/23, the shutter

actuator RL 521/23, the binary output RS 510/23 for the control of the lighting and the blinds and the

binary input RL 260/23.

· 4 - UP 220/x1, Push button interface: The interface converts signals from conventional push buttons

into KNX telegrams.