User Manual

Application Guide

No 4b

Living room

Synco

™

& Gamma

Flush mounting

, with display and oper

tion of temperature

Highlights

· Room thermostat with large display, integrated actuator and digital inputs

· Flush mounting actuators and KNX interfaces

Room setup

· 1 - RDG100KN, Room thermostat: The RDG100 measures the room temperature and controls the

radiator and the cooling ceiling. A heating/cooling demand is automatically sent to the primary controller.

· 2 - UP 258D11, Presence detector: The UP 258 detects the room occupancy and measures the

brightness. These data are forwarded to the room thermostat and the binary output.

· 3 - UP 510/13, Binary output, 2-fold:

The UP 510 receives control commands from the bus and switches

the lights accordingly.

· 4 - UP 520/13, Shutter actuator: The UP 520 receives control commands from the bus and drives the

blinds accordingly.

· 5, 6 - UP 220/x1, Push button interface: The interface converts signals from conventional push buttons

into KNX telegrams.