Synco-Gamma Application Guide School building – class room www.siemens.
More efficiency in schools – with Synco and Gamma building control Requirements School buildings require special building technology solutions. They demand low construction costs and economical operation. The buildings must ensure optimum learning and working conditions, the lowest possible energy consumption, safe operation, and protection against damage and vandalism. In addition, they must safeguard people in case of emergency.
Overview No.
Room usage scenarios In class rooms the following usage scenarios are supposed to be probable: HVAC This could be a possible HVAC scenario: The room temperature is increased at 6.00 – controlled by a time schedule – to the Precomfort temperature setpoint (20 °C) and reduced again at 21.00 to the Economy temperature level (18 °C). Also, when people enter the room, the temperature is increased to the Comfort level (21 °C) and reduced again when people leave.
Application Guide No. 1a Basic application Synco™ living & Gamma Classroom This application variant provides basic room automation for classrooms with radiator heating in school buildings with up to 8 classrooms on 4 floors. It meets the requirements to reach energy performance class C. Overview of functionality Room temperature control: 1. Heating of the room when used. 2. Room temperature reduction when the window is left open. 3. Room temperature reduction during the night – time schedule. 4.
Application Guide No. 1a Basic application Synco™ living & Gamma Classroom Room temperature control The temperature of each classroom is acquired and controlled. The heat demand from all rooms is collected and transmitted to the primary plant. Non-occupancy periods during the night can be programmed in a time scheduler for each room. During these time periods, the room temperatures are automatically reduced.
Application Guide No. 1a Basic application Synco™ living & Gamma Classroom Remote control Lights, blinds, windows and room temperatures can be controlled and monitored from a central location via the Synco living central apartment unit, a touch panel or via web server. By integrating a Web server, remote control and monitoring are made possible via Web browser on a PC or smartphone.
Application Guide No. 1a Basic application Synco™ living & Gamma Classroom Device list Optional Variant Limitations Key Product no. and description Stock no.
Application Guide No. 1a Basic application Synco™ living & Gamma Classroom Functional description Description of functions Individual room temperature control Blind protection The room temperature sensor (QAA) acquires the room temperature and sends the value periodically to the central apartment unit (QAX) via KNX RF. The window/door switches (AP) send window/door status information to the central apartment unit (QAX) as well. The wind speed sensor (AP 257/42) acquires permanently the wind speed.
Application Guide No. 1a Basic application Synco™ living & Gamma Classroom Secondary documentation The following application sheets describe individual controller applications with more specific information. They can be downloaded from the Internet: www.siemens.com/hit for Synco and www.siemens.com/knx-td for Gamma. Application number Title Product no.
Application Guide No. 1b Advanced application Synco™ living & Gamma Classroom This application variant provides advanced room automation for classrooms with radiator heating in school buildings with up to 8 classrooms on 4 floors. It meets the requirements to reach energy performance class B. Overview of functionality Room temperature control: 1. Heating of the room when used – time schedule. 2. Room temperature reduction when the room is not occupied – presence detector. 3.
Application Guide No. 1b Advanced application Synco™ living & Gamma Classroom · · · · · · · · · · · QAX913, Synco living Central Apartment Unit: Central and wireless control of up to 12 rooms. Receives data from room temperature controller, meteo sensor, window contacts and sends commands to the radiator control actuators and heating demands to the heating controller. QAA910, Synco living Room Temperature Sensor: Measures the room temperature and sends the data to the central apartment unit.
Application Guide No. 1b Advanced application Classroom Synco™ living & Gamma Control of lighting Presence detectors also help save energy by automatically turning off the lights when the room is not occupied. A brightness sensor helps to switch the lights so that the room is optimally illuminated using as little artificial light as necessary. Control of blinds A weather station outside of the building protects up to 4 facades against excessive solar irradiance in the summer.
Application Guide No. 1b Advanced application Synco™ living & Gamma Classroom Sales arguments Device list 1 Integrated room-primary application: Siemens offers an integrated application solution for small and medium-size school buildings which also includes the primary HVAC control part – a fully integrated and tested solution with products from a single source. 2 Energy savings through individual room temperature control: Due to individual room control, up to 30% heating energy can be saved.
Application Guide No. 1b Advanced application Synco™ living & Gamma Classroom Optional Variant Limitations Key Product no. and description Stock no. Quantity 15 UP 588/x3 color touch panel 5WG1 588-2ABx3 1 per building Key Product no. and description Stock no. Quantity 2a RRV918 heating circuit controller RRV918 1 per floor (window front), max.
Application Guide No. 1b Advanced application Synco™ living & Gamma Classroom Functional description Description of functions Individual room temperature control The room temperature sensor (QAA) acquires the room temperature and sends the value periodically to the central apartment unit (QAX) via KNX RF. The window/door switches (AP) send window/door status information to the central apartment unit (QAX) as well. Manual switching and dimming is possible via wall switch.
Application Guide No. 1b Advanced application Synco™ living & Gamma Classroom Energy efficiency indication Web server OZW772 provides the energy efficiency indication function for the HVAC system which reminds the user of settings outside the limits from the point of view of energy efficiency. In case of a nonefficient status, the user will be notified by e-mail or smartphone app. The limits can be defined by the user.
Application Guide No. 1c Advanced application Synco™ living & Gamma Classroom This application variant provides high-end room automation for classrooms with radiator heating in school buildings with up to 8 classrooms on 4 floors. It meets the requirements to reach energy performance class A. Overview of functionality Room temperature control: 1. Heating of the room when used – time schedule. 2. Room temperature reduction when the room is not occupied – presence detector. 3.
Application Guide No. 1c Advanced application Synco™ living & Gamma Classroom · · · · · · · · · · · QAX913, Synco living Central Apartment Unit: Central and wireless control of up to 12 rooms. Receives data from room temperature controller, meteo sensor, window contacts and sends commands to the radiator control actuators and heating demands to the heating controller. QAA910, Synco living Room Temperature Sensor: Measures the room temperature and sends the data to the central apartment unit.
Application Guide No. 1c Advanced application Classroom Synco™ living & Gamma Control of lighting Presence detectors also help save energy by automatically turning off the lights when the room is not occupied. A brightness sensor helps to switch the lights so that the room is optimally illuminated using as little artificial light as necessary. Control of blinds A weather station outside of the building protects up to 8 facades against excessive solar irradiance in the summer.
Application Guide No. 1c Advanced application Synco™ living & Gamma Classroom Sales arguments 1 Integrated room-primary application: Siemens offers an integrated application solution for small and medium-size school buildings which also includes the primary HVAC control part – a fully integrated and tested solution with products from a single source. 2 Energy savings through individual room temperature control: Due to individual room control, up to 30% heating energy can be saved.
Application Guide No. 1c Advanced application Synco™ living & Gamma Classroom Device list Optional Variant Limitations Key Product no. and description Stock no.
Application Guide No. 1c Advanced application Synco™ living & Gamma Classroom Functional description Description of functions Individual room temperature control Constant light control The room temperature sensor (QAA) acquires the room temperature and sends the value periodically to the central apartment unit (QAX) via KNX RF. The window/door switches (AP) send window/door status information to the central apartment unit (QAX) as well.
Application Guide No.
Application Guide No. 1d Advanced application Synco™ living & Gamma Classroom This application variant provides high-end room automation for classrooms with radiator heating in school buildings with up to 8 classrooms on 4 floors. It meets the requirements to reach energy performance class A. Overview of functionality Room temperature control: 1. Heating of the room when used – time schedule. 2. Room temperature reduction when the room is not occupied – presence detector. 3.
Application Guide No. 1d Advanced application Synco™ living & Gamma Classroom · · · · · · · · · · · · QAX913, Synco living Central Apartment Unit: Central and wireless control of up to 12 rooms. Receives data from room temperature controller, meteo sensor, window contacts and sends commands to the radiator control actuators and heating demands to the heating controller. QAA910, Synco living Room Temperature Sensor: Measures the room temperature and sends the data to the central apartment unit.
Application Guide No. 1d Advanced application Classroom Synco™ living & Gamma Control of lighting Presence detectors also help save energy by automatically turning off the lights when the room is not occupied. A brightness sensor helps to switch the lights so that the room is optimally illuminated using as little artificial light as necessary. Control of blinds A weather station outside of the building protects up to 8 facades against excessive solar irradiance in the summer.
Application Guide No. 1d Advanced application Synco™ living & Gamma Classroom Sales arguments 1 Integrated room-primary application: Siemens offers an integrated application solution for small and medium-size school buildings which also includes the primary HVAC control part – a fully integrated and tested solution with products from a single source. 2 Energy savings through individual room temperature control: Due to individual room control, up to 30% heating energy can be saved.
Application Guide No. 1d Advanced application Synco™ living & Gamma Classroom Device list Optional Variant Limitations Key Product no. and description Stock no. Quantity 1 QAA910 room temperature sensor QAA910 1 per room 2 RRV918 heating circuit controller RRV918 1 per floor (window front), max.
Application Guide No. 1d Advanced application Synco™ living & Gamma Classroom Functional description Description of functions Individual room temperature control Constant light control The room temperature sensor (QAA) acquires the room temperature and sends the value periodically to the central apartment unit (QAX) via KNX RF. The window/door switches (AP) send window/door status information to the central apartment unit (QAX) as well.
Application Guide No.
Application Guide No. 1e High-end application Synco™ living & Gamma Classroom This application variant provides high-end room automation for classrooms with radiator heating in school buildings with up to 8 classrooms on 4 floors. It meets the requirements to reach energy performance class A. Overview of functionality Room temperature control: 1. Heating of the room when used – time schedule. 2. Room temperature reduction when the room is not occupied – presence detector. 3.
Application Guide No. 1e Advanced application Synco™ living & Gamma Classroom · · · · · · · · · · · · QAX913, Synco living Central Apartment Unit: Central and wireless control of up to 12 rooms. Receives data from room temperature controller, meteo sensor, window contacts and sends commands to the radiator control actuators and heating demands to the heating controller. QAA910, Synco living Room Temperature Sensor: Measures the room temperature and sends the data to the central apartment unit.
Application Guide No. 1e High-end application Classroom Synco™ living & Gamma Control of lighting Presence detectors also help save energy by automatically turning off the lights when the room is not occupied. A brightness sensor helps to switch the lights so that the room is optimally illuminated using as little artificial light as necessary. Control of blinds A weather station outside of the building protects up to 8 facades against excessive solar irradiance in the summer.
Application Guide No. 1e Advanced application Synco™ living & Gamma Classroom Sales arguments 1 Integrated room-primary application: Siemens offers an integrated application solution for small and medium-size school buildings which also includes the primary HVAC control part – a fully integrated and tested solution with products from a single source. 2 Energy savings through individual room temperature control: Due to individual room control, up to 30% heating energy can be saved.
Application Guide No. 1e High-end application Synco™ living & Gamma Classroom Device list Optional Variant Limitations Key Product no. and description Stock no. Quantity 1 QAA910 room temperature sensor QAA910 1 per room 2 RRV918 heating circuit controller RRV918 1 per floor (window front), max.
Application Guide No. 1e Advanced application Synco™ living & Gamma Classroom Functional description Description of functions Individual room temperature control Constant light control The room temperature sensor (QAA) acquires the room temperature and sends the value periodically to the central apartment unit (QAX) via KNX RF. The window/door switches (AP) send window/door status information to the central apartment unit (QAX) as well.
Application Guide No.
Application Guide No. 2 High-end application Synco™ living & Gamma Class Room This application variant provides high-end room automation for classrooms with radiator heating in school buildings with up to 8 classrooms on 4 floors. It meets the requirements to reach energy performance class A. Overview of functionality Room temperature control: 1. Heating of the room when used – time schedule. 2. Room temperature reduction when the room is not occupied – presence detector. 3.
Application Guide No. 2 High-end application Synco™ living & Gamma Classroom · · · · · · · · · · · · RMB795B, Central control unit: Central control for 10 rooms / room groups via KNX. QMX3.P70, Room unit with room temperature controller and CO2 sensor: Measures and controls the room temperature and sends the control commands to the switching actuator. The air quality is displayed by a color-changeable LED.
Application Guide No. 2 High-end application Class Room Synco™ living & Gamma Beleuchtungssteuerung Presence detectors also help save energy by automatically turning off the lights when the room is not occupied. A brightness sensor helps to switch the lights so that the room is optimally illuminated using as little artificial light as necessary. Jalousiensteuerung A weather station outside of the building protects up to 8 facades against excessive solar irradiance in the summer.
Application Guide No. 2 High-end application Synco™ living & Gamma Classroom Sales arguments 1 Integrated room-primary application: Siemens offers an integrated application solution for small and medium-size school buildings which also includes the primary HVAC control part – a fully integrated and tested solution with products from a single source. 2 Energy savings through individual room temperature control: Due to individual room control, up to 30% heating energy can be saved.
Application Guide No. 2 High-end application Synco™ living & Gamma Class Room Device list Key Product no. and description Stock no. Quantity 1 QMX3.P70 sensor for wall mounting S55624-H104 1 per room 2 N 562/11, switching actuator, main mod.
Application Guide No. 2 High-end application Synco™ living & Gamma Classroom Functional description Description of functions Individual room temperature control Constant light control The room unit (QMX3) measures and controls the room temperature and sends the control signal periodically to the switching actuator (N 562). The window/door switches (S 290 + UP 220) send window/door status information to the room unit (QMX3).
Application Guide No.
Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel +41 41 724 24 24 Siemens Building Technologies Brunel House Sir William Siemens Square, Frimley Camberley Surrey, GU16 8QD United Kingdom Tel +44 1276 696000 Siemens Ltd Building Technologies Division 22/F, AIA Kowloon Tower, Landmark East 100 How Ming Street Kwun Tong, Hong Kong Tel +852 2870 7888 The information in this document contains general descriptions of technical options avai
