User Manual

Application Guide
Advanced application
No. 1d
Classroom
Synco™ living &
Gamma
26
This application variant provides high-end room automation for classrooms with radiator heating in school buildings
with up to 8 classrooms on 4 floors. It meets the requirements to reach energy performance class A.
Overview of functionality
Room temperature control:
1. Heating of the room when used – time schedule.
2. Room temperature reduction when the room is not occupied – presence detector.
3. Room temperature reduction when the window is left open.
4. Room temperature reduction during the night – time schedule.
5. Automatic exchange of heating and cooling requests with the primary plant if required.
Control of lighting:
6. Manual control via wall switch.
7. Remote control and status monitoring of lighting.
8. Automatic switching off of all lights when the room is not occupied.
9. Automatic switching of lighting according to the presence status in the room.
10. Automatic switching of lighting according to the brightness level in the room.
11. Constant light control.
Control of blinds:
12. Manual control via wall switch.
13. Remote control and status monitoring of the blinds.
14. Control of blinds according to twilight (automatically lowered during the night).
15. Blind protection control in case of storm (safety function).
16. Facade shading control.
17. Sunlight tracking control for more daylight.
18. Shadow outline tracking control for more daylight.
Remote monitoring, operation and alarming:
19. Central acquisition and monitoring of the room temperature including trend recording.
20. Heating energy efficiency indication.
21. Central acquisition and monitoring of room occupancy.
22. Central acquisition and monitoring of lighting status.
23. Central acquisition and monitoring of blind status.
24. Remote alarming in case of faults, alarms or if the plant doesn’t run energy-efficiently.
Room setup