User Manual

Application Guide
Basic application
No. 1a
Classroom
Synco™ living &
Gamma
7
Room temperature
control
The temperature of each classroom is acquired and controlled. The heat demand from all rooms is collected and
transmitted to the primary plant. Non-
occupancy periods during the night can be programmed in a time scheduler for
each room. During these time periods, the room temperatures are automatically reduced. Open windows are auto-
matically detected and room temperature setpoints lowered to save heating energy.
Control of lighting
The lights are manually switched via push buttons in the room or through remote control.
Control of blinds
A wind speed sensor protects the blinds from damage caused by storms.