Service manual

3-44 SPARC Enterprise T1000 Server Service Manual • April 2007
3. Run the clearfault command with the UUID provided in the showfaults
output:
4. Clear the fault from all persistent fault records.
In some cases, even though the fault is cleared, some persistent fault information
remains and results in erroneous fault messages at boot time. To ensure that these
messages are not displayed, perform the following command:
fmadm repair UUID
Example:
3.6 Collecting Information From Solaris OS
Files and Commands
With the Solaris OS running on the server, you have the full compliment of Solaris
OS files and commands available for collecting information and for troubleshooting.
If POST, ALOM, or the Solaris PSH features do not indicate the source of a fault,
check the message buffer and log files for notifications for faults. Hard drive faults
are usually captured by the Solaris message files.
Use the dmesg command to view the most recent system message. To view the
system messages log file, view the contents of the /var/adm/messages file.
3.6.1 Checking the Message Buffer
1. Log in as superuser.
sc> clearfault 7ee0e46b-ea64-6565-e684-e996963f7b86
Clearing fault from all indicted FRUs...
Fault cleared.
# fmadm repair 7ee0e46b-ea64-6565-e684-e996963f7b86