Service manual

4-2 SPARC Enterprise T1000 Server Service Manual • April 2007
4.1.1 Required Tools
The server can be serviced with the following tools:
■ Antistatic wrist strap
■ Antistatic mat
■ No. 2 Phillips screwdriver
4.1.2 Shutting the System Down
Performing a graceful shutdown ensures that all of your data is saved and the
system is ready for restart.
1. Log in as superuser or equivalent.
Depending on the nature of the problem, you might want to view the system status
or the log files, or run diagnostics before you shut down the system. Refer to the
SPARC Enterprise T1000 Server Administration Guide for log file information.
2. Notify affected users.
Refer to your Solaris system administration documentation for additional
information.
3. Save any open files and quit all running programs.
Refer to your application documentation for specific information on these processes.
4. Shut down the OS.
At the Solaris OS prompt, issue the uadmin command to halt the Solaris OS and to
return to the ok prompt.
This command is described in the Solaris system administration documentation.
5. Switch from the system console prompt to the SC console prompt by issuing the
#. (Hash-Period) escape sequence.
# shutdown -g0 -i0 -y
WARNING: proc_exit: init exited
syncing file systems... done
Program terminated
ok
ok #.
sc>