Clock User Manual
Table Of Contents
- SICLOCK® TC 100 Plant Central Clock
- Overview
- Safety notices
- Preface
- Table of Contents
- 1 Safety instructions
- 2 Description
- 3 Hardware description
- 4 Operation planning
- 5 Mounting
- 6 Connection
- 7 Configuration Tool
- 8 Parameter assignment and operation of the device
- 9 Parameter assignment
- 10 Parameter table
- 11 Service and maintenance
- 12 Messages
- 13 Technical data
- 14 Dimension drawing
- 15 Circuit diagrams
- 16 Spare parts / accessories
- A Annex
- B ESD guidelines
- C List of icons
- D Glossary
- Index
Configuration Tool
7-6
© Siemens AG 2010 All Rights Reserved
SICLOCK
®
TC100 Operating Instructions
7.4.2 Filters
You can show and hide specific events by means of a filter to make searching the
archive easier. All the events listed in the Include window are displayed in the
Archive table, all the events listed in the Exclude window are not displayed.
Changing the assignment of an event from the Include to the Exclude filter,
or vice versa:
1. Click on the event in the Include or Exclude window.
−> The selected event is highlighted blue.
2. Click the button.
−> The event is moved from the Include into the Exclude filter, or vice versa.
How to select and move multiple events in the filters:
1. Hold the CTRL button down while you select the events in the filter with mouse
clicks.
−> The selected event is highlighted blue, and the blue highlighting of previ-
ously selected events is retained.
2. Click the button.
−> The events are moved from the Include into the Exclude filter, or vice versa.
How to select and move successive events in the filters:
1. Click the first item in the group of events with the mouse.
2. Hold the SHIFT key down, and click the last item in the group of events with
the mouse.
−> These two events and all those lying between them are selected.
3. Click the button.
−> The events are moved from the Include into the Exclude filter, or vice versa.
How to remove all events from the Include or Exclude filter:
1. Click the button above the Include or Exclude filter.
−> The contents of the Include or Exclude filter are removed. The events so
removed are now available for selection in the other filter.