Specifications

TC35i AT Command Set

Confidential / Released

TC35i_ATC_V01.05 Page 24 of 278 04.08.2003

Reference

V.25ter/GSM

07.07

Note

· There is no <mem> for emergency call (“EN”).

· The command is not applicable to data calls. Any attempt to dial a data call

number from <mem> causes the result code “NO CARRIER” to appear.

· Parameter <mgsm> only if no *# code is within the dial string.

· *# codes sent with ATD are treated as voice calls. Therefore, the command

must be terminated with a semicolon “;”.

· See ATX command in Chapter 2.31 for setting result code and call monitoring

parameters.

Example

To query the location number of the phone book entry:

AT+CPBR=1,xx

TA returns the entries available in the active phone book.

To dial a number from the SIM phone book, for example the number stored to lo-

cation 15:

ATD>SM15;

To dial a phone number stored in the last dial memory on the SIM card:

ATD>LD9;