Operation Manual

16
en
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue� Such residue can
cause corrosion� New sponge cloths may
contain salts. Salts can cause rust lm
on stainless steel and must therefore be
washed out thoroughly before use�
Frost protection
A
To avoid damage caused by frost
during transport and storage, the
appliance must be completely
emptied rst.
Information: The appliance must be ready
for use and the water tank (16) lled.
1� Place a large container under the milk
frother outlet (6)�
2� Press the steam button (11)�
LED F ashes and the appliance now
heats up for approximately 20 seconds�
3� If LED
F lights up, open the milk frother
(6) by pulling it out and release steam
for about 15 seconds�
4� Press the power on/off switch O / I (9) to
switch off the appliance�
5� Empty the water tank (16) and the drip
tray (8)�
Accessories
The following accessories are available
from retailers or from customer service:
Accessories Ordering number
Retail /
Customer service
Cleaning tablets TZ60001 / 00310575
Descaling tablets TZ80002 / 00576693
Water lter TZ70003 / 00575491
Care set TZ80004 / 00576330