Manual

48
en
Cleaning
Duration: approx. 8 minutes.
Clean ▶ start
The start button 8 ashes while the differ-
ent cleaning processes are running. The
gures on the top right indicate the progress
of the programme.
● Fill the water tank 11 up to the “max”
mark.
● Press the à button 3.
Clean ▶ start
● Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it. The
appliance rinses twice.
Position swivel arm
● Swivel the coffee outlet 9 to the left until it
clicks into place.
Cleaning
Open powder compartment
● Open the powder compartment 18.
Insert Siemens cleaning tablet and
close powder compartment
● Drop a Siemens cleaning tablet into the
drawer 18 and close it.
Press start
● Press the start button 8. The clean-
ing programme will now run for about
7 minutes.
Cleaning
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it.
The appliance is ready for use again.
calc‘nClean
Duration: approx. 36 minutes.
calc‘nClean combines the separate
functions of descaling and cleaning.
If both programmes are due to be run
soon, the espresso machine automatically
suggests this service programme.
calc‘nClean ▶ start
The start button 8 ashes while the differ-
ent calc‘nClean processes are running. The
gures on the top right indicate the progress
of the programme.
Important: If there is a water lter 29 in
the water tank 11, it needs to be removed
before the service programme is run.
● Press the à button 3.
calc‘nClean ▶ start
● Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it.
● Swivel the coffee outlet 9 to the right until
it clicks into place.
Place 1 l container under milk frother
Place suction pipe in container ▶ start
● Place a container with a capacity of at
least 1 l under the milk frother 10.
● Place the end of the suction pipe 10d in
the container.
TE809_1DE.indb 48 08.05.2013 12:10:17