Operating instructions

Building Technologies - 19 - TEL50.GSM
[USER]
SMS command SMS reply Action
USER USER01=3351234567.1 USER01=3351234567.1 User USER01 set as Administrator
USER USER02=3471234567.2 USER02=3471234567.2 User USER02 set as User
USER USER03=3291234567.3 USER03=3291234567.3 User USER03 set as Notify
USER USER20=3201234567 USER20=3201234567 User 20 set as Notify
USER USER01 USER01=3351234567.1 queries USER01 position
USER USER05 USER05 deleted queries USER05 position (no number present)
USER USER01= USER01 deleted cancels USER01 position
The USER numbers entered without extension assume the Notify User (extension.3) default value. There is no limit to the
number of users for each profile. In this section there is a SECURITY parameters that enables control of the incoming call
numbers. When this parameter is enabled (SECURITY=1), only the users in the USER list can interact with the device
according to their profile (administrator, user, notify). A voice call or an SMS message from a number that is not on the USER
list will not receive a reply. The SMS number must be exactly the same as the configured SMS or it will not be recognized.
When the list is empty, in case of activation SECURITY=1, the number used to send this SMS will automatically be inserted as
administrator even in case it has been inserted as user or notify.
[USER]
SMS command SMS reply Action
USER SECURITY=0 SECURITY=0 Incoming calls filter disabled
USER SECURITY=1 SECURITY=1 Incoming calls filter enabled
USER SECURITY SECURITY=0 or SECURITY=1 queries status of SECURITY variable