Operation Manual
20
deen
I lights up on the display.
● Empty, clean and reinsert the trays 21
and 22.
The appliance heats up and is ready for use
again when all four buttons 4, 5, eco and
h light up and remain lit.
Important: If the service programme is
interrupted, e.g. due to a power cut, it is
vital that the appliance be rinsed before it
is used again.
● Press the eco button.
The S LED and h button ash.
● Rinse the water tank 13 thoroughly and
ll with fresh water.
● Press the steam button h. The appliance
is rinsed and liquid ows into the tray.
The J LED ashes.
● Place a suitable container (approx.
0.5 litres) under the nozzle 9 and turn
the dial 8 to g/h. Water runs into the
container.
The J LED lights up.
● Turn the dial 8 to
●
.
The appliance rinses.
I lights up on the display.
Empty, clean and reinsert the trays.
The appliance is ready for use again.
●
Anti-freeze
In order to avoid damage through cold
during transportation and storage, the
appliance must be emptied completely
rst.
The appliance must be ready for use.
● Place a large, narrow container under
foaming nozzle 9.
● Press h button.
● As soon as J lights up on display, turn
dial 8 to g/h.
● Remove, empty, and replace water tank.
The appliance will release steam for a
while.
● When foaming nozzle 9 stops releasing
steam, turn dial back to
●
.
● Turn off the appliance.
Disposal
A
This appliance is labelled in accordance
with the European Directive 2002/96/EG
relating to waste electrical and electronic
equipment – WEEE. The directive provides
the framework for the EU-wide take-back
and disposal of end-of-life appliances.
Please ask your specialist retailer about
current disposal facilities.
Guarantee
The guarantee conditions for this appliance
are as dened by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from the
dealer from whom the appliance was pur-
chased. The bill of sale or receipt must be
produced when making any claim under the
terms of this guarantee.
Changes reserved.