User Manual

ManualsBrandsSiemens ManualsExtinguishing - ToolsTOOL-CYLVENT

A6V11387366_en--_a Smart Infrastructure

2019

Building Products

Sinorix™

TOOL-CYLVENT

IG-01, IG-55, IG-100, IG-541, CO2

Cylinder venting tool

● For controlled draining of an extinguishant cylinder

● Installed on the valve of an inert gas or CO2 cylinder

Product code: S54476-B804-A1

Summary of content (4 pages)

PAGE 1
Sinorix™ TOOL-CYLVENT IG-01, IG-55, IG-100, IG-541, CO2 Cylinder venting tool ● ● For controlled draining of an extinguishant cylinder Installed on the valve of an inert gas or CO2 cylinder Product code: S54476-B804-A1 A6V11387366_en--_a 2019-12-12 Smart Infrastructure Building Products
PAGE 2
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions The TOOL-CYLVENT tool is used for the controlled emptying of an extinguishant cylinder. The tool is screwed onto the pressure gauge port of the cylinder valve. When the lever is operated, the gas is released through the hole in the upper part of the tool. The tool is designed to be fitted and removed safely when the cylinder is pressurized.
PAGE 3
Operation Prerequisite: ● Check that the lever of the venting tool is in the closed position. To empty the gas from the cylinder: 1. On the cylinder valve, unscrew the plug on the pressure gauge port. 2. Screw the venting tool with the M12x1 connector on the pressure gauge port of the cylinder valve. 3. Tighten to the stop using a 19 mm wrench. 4. Operate the lever to open the ball valve. 5. When the cylinder is emptied, operate the lever again to close the ball valve. 6. Unscrew the venting tool.
PAGE 4
Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 4 Siemens Schweiz AG Building Products Document ID A6V11387366_en--_a Edition 2019-12-12 © Siemens Switzerland Ltd, 2019 Technical specifications and availability subject to change without notice.