User Manual

Document No. 553-141
Installation Instructions
April 30, 2020
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2020 Siemens Industry, Inc.
Siemens Industry, Inc.
Smart Infrastructure
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail].
Document No.553-141
Printed in the USA
Page 4 of 4
Completing the TX-I/O Module
Installation
1. Fully seat each TX-I/O module in its Terminal
Base.
2. Remove the address keys from the strip, and then
insert as shown.
NOTE: The TX-I/O address keys must be correctly
seated and closed in order to function. Make sure
the top of the address key is flush with the top of
the module.
● Insert the TX-I/O Module labels.
– Tear out and fold the labels.
– Match each label to the address key and slide
the label into the detachable label holder.
The installation is now complete.