Network Hardware User Manual

218 U3585-J-Z125-8-76
BCAM CONNECTION report SM2 reports
BCAM CONNECTION report
This report supplies information on the data sent and received as well as bucket-specific
time statistics for defined connection sets.
Report output
The REPORT BCAM statement is used to request the output of the BCAM CONNECTION
report.
The report can only be output if the SM2 administrator has
– defined the monitoring parameters using the SET-BCAM-CONNECTION-PARAMETER
statement
– defined the connection sets to be monitored using the ADD-BCAM-CONNECTION-
SET statement
– started the monitoring process using the START-MEASUREMENT-PROGRAM
TYPE=*BCAM-CONNECTION statement
A separate screen is output for each of the connection sets to be monitored (up to 32). If
the number of connections to be monitored within a connection set is zero, no report is
output for that connection set.
D016ZE04 SM2 BCAM CONNECTION CYCLE: 120 S 99-03-24 14:30:00
SET: DIALOG # CONNECTIONS: 304
| TSDU | DATA | BUFFER % | PWIN | PDATA SCOM | ZWR
+-----+-------+-------+-------------+-------+-------+ +-------+-------+
| IN | 2.1 | 0.2 | 0.0 0 | 5.7 | 9.2 | | 0.0 | 0.0 |
| OUT | 8.8 | 3.2 | 0.2 0 | 3.9 | 10.9 | +-------+-------+
+-----+-------+-------+-------------+-------+-------+
+-----------------+-----------------+-----------------+-----------------+
| INWAIT TIME | REACT TIME | INPROC TIME | OUTPROC TIME |
+-----------------+-----------------+-----------------+-----------------+
| BUCKET COUNT | BUCKET COUNT | BUCKET COUNT | BUCKET COUNT |
+-----------------+-----------------+-----------------+-----------------+
| 5 256 | 500 238 | 5 255 | 5 776 |
| 10 2 | 1000 8 | 10 3 | 10 21 |
| 100 0 | 2000 3 | 100 0 | 100 156 |
| 1000 0 | 4000 5 | 1000 0 | 1000 106 |
|> 1000 0 |> 4000 4 |> 1000 0 |> 1000 2 |
+-----------------+-----------------+-----------------+-----------------+