Commissioning Instructions
Table Of Contents
- 1 Functions
- 2 UI description
- 2.1 Home Page (Navigation function)
- 2.2 Multifunction page
- 2.3 General temperature control page
- 2.4 VRF air conditioner function page
- 2.5 Floor heating function page
- 2.6 Ventilation system function page
- 2.7 RGB dimming function page
- 2.8 Energy metering display function page
- 2.9 Air quality display function page
- 2.10 Background music function page
- 2.11 Setting page
- 2.12 Screen
- 2.13 Administrator function via password
- 2.14 Administrator function via bus
- 2.15 Other pages
- 3 Parameters and communication objects
- 3.1 "General" interface
- 3.2 "Home page" interface
- 3.3 "Function page" interface
- 3.3.1 "Page settings" parameters
- 3.3.2 "Function page" communication objects
- 3.3.3 "Page x - Multifunction (Lighting/Blind/Scene/Value send)" parameters and communication objects
- 3.3.4 "Page x - General Temp. Control" parameters and communication objects
- 3.3.5 "Page x - Enhanced Floor Heating" parameters and communication objects
- 3.3.6 "Page x - VRF interface & Operation" parameters and communication objects
- 3.3.7 "Page x - Ventilation System" parameters and communication objects
- 3.3.8 "Page x - Air Quality display" parameters and communication objects
- 3.3.9 "Page x - Energy Metering Display" parameters and communication objects
- 3.3.10 "Page x - RGB Dimming" parameters and communication objects
- 3.3.11 "Page x - Background Music" parameters and communication objects
- 3.4 "Timer function" interface
- 3.5 "Event Group function" interface
- 3.6 "Logic function" interface
- 4 Icons
- 5 Appendix
UI description
Multifunction page
2
A6V12035440_en--_c
13 | 121
Number
Description
Number
Description
①
The simulation of blind
position
②
Sliding position in percentage
③
Up
④
Down
⑤
Stop
Venetian Blinds (with slat)
Number
Description
Number
Description
①
The simulation of slat angle
(Blind)
②
The simulation of blind &
louver
③
Sliding position in percentage
● 0%: blind fully opened
● 100%: blind fully closed
④
Louver angle in percentage
● 0%: slat in horizontal
position and the light is
fully in
● 100%: slat in vertical
position and no light is in
⑤
Up (Blind & louver)
⑥
Down (Blind & louver)
⑦
Stop (Blind & louver)
● Pressing stop button
once can stop blinds and
louver when it goes up or
down. Then the blind slat
angle can be adjusted
slightly by pressing stop
button.