Commissioning Instructions

Parameters and communication objects
"Event Group function" interface
3
A6V12035440_en--_c
99 | 121
No.
Name
Object function
Length
Flag
Data type
487
Timer 1
2byte unsigned
value
2 bytes
CT
7.001 pulses
The communication object is used to send the preset telegram value of the time function to the bus, and the time function,
default value and object type set by the parameters. The time is up to send the default telegram value to the bus. A total of 16
timing (x = 16) can be set.
513
514
515
516
517
518
519
Timer
Enable/Disable
Monday
Enable/Disable
Tuesday
Enable/Disable
Wednesday
Enable/Disable
Thursday
Enable/Disable
Friday
Enable/Disable
Saturday
Enable/Disable
Sunday
1 bit
CW
1.003 enable
The communication objects are used to enable or disable the cycle timer via bus, i.e., to enable or disable the timing of a day
of the week via bus.
3.5 "Event Group function" interface
3.5.1 "Event Group Function" parameters and communication
objects
Parameters
Parameter setting "Event Group setting" is used to define and process event tasks.
An event opening can trigger the sending of several telegrams on the bus, open
various functions and make various settings concurrently. Totally up to 8 event
groups can be configured. For each group, there are up to 8 outputs per event
group and 8 scenes to be triggered per output. They are all configurable. The event
group also can be recalled by other devices from bus.
Name
Description
Range
Event Group function
This is used to determine whether Event Group x is enabled
or disabled.
-
Event Group - NO. x
When Event Group - NO. x is enabled, then 8 outputs are
visible.
Disable
Enable