Specification

Data Sheet
www.usa.siemens.com/VersiCharge
VersiCharge
™
Electric Vehicle
Charging Stations
All VersiCharge devices feature:
Easy to install
The included mounting bracket is easily attached to many surfaces with the included screws.
Universal VersiCharge units can either be plugged in below or behind the unit. Hardwire
installation is possible with all VersiCharge models.
Cost effective option available
For installations which do not require the unit to be plugged into the wall, the VersiCharge
hardwire (HW) model is a very cost effective option without sacrificing any convenience.
Delay button
A simple, multi-setting delay timer has been built into the Siemens VersiCharge to allow
the user to delay charging up to 8 hours with the press of a button. Charging sessions
automatically start after the delay timer has completed.
Charging status indicating halo
An LED halo on every VersiCharge makes reading the charging status of the unit from a
distance seem like second nature.
Maximum power adjustment switch
Installing electrical vehicle chargers into older homes can be a challenge. With the
Siemens VersiCharge, the EVSE power output can be adjusted to match facility capability.
Increments range from a maximum power setting of 7.2 kW down to 1.8 kW.
Designed for the user and the environment
Integrated holster keeps dust and debris out of plug. 60% recycled material with matte finish
is rugged, durable, and easy to clean. The SAE J1772 connector is ergonomically designed
for user comfort. The 20’ cord is easily stored with the integrated cord management system.
Flexible demand response profile
To support advanced demand response programs, all VersiCharge models feature variable
amperage demand response and allow consumers to take advantage of utility rate
programs. This feature ensures the energy demand from the EVSE can be curtailed with a
reduced impact to the end user.
Scan
QR Code
for more
information