Installation Guide

13 © 2015 Siemens Industry, Inc. 813776
2.6 Device States
EVSE's do not have the capability to determine whether your car has been charged or not. Refer to car
manual for indication of car battery status.
State Name
Description
Indicator(s)
Halo Status
Indicator
Power Available
240V or 208V Power Present
'Power Available'
Off
Ready to
Charge
EV detected, waiting for charging
command from EV
'Power Available' and
‘Ready’
Green - Solid
Charging
Charging EV
'Power Available' and
'Charging'
Green - Fading in
and out
Pause*
Operation paused
'Power Available’ and
‘Pause’
Off
Delay Timer
Operation awaiting delay timer
'Power Available' and
'Hour(s) Delay'
Off
Remote - Third
Party
System is controlled via third
party remote control interface
'Power Available' and
‘Remote Control Lock' **
Dependent upon
command
Remote - Local
Last command received initiated
via application
‘Power Available’ and
‘Remote Control’
Dependent upon
command
Reduced
Charge
Commanded to limit the
maximum available rate to less
than 7.2kW maximum
‘Power Available’ on and
‘Charging’ pulsing**
Green - Fading in
and out
* Some EV’s may initiate a delay of charge when exiting out of the ‘Pause’ state before the EV starts
telling the VersiCharge to start charging again. Please refer to the user manual for the EV for further
information.
** Press and hold the “Pause” button for 5 seconds to opt out of a remote third party (demand response)
event or to return charge rate to maximum kilowatt charge. Please be aware that consistently opting out
of DR events may disqualify some utility rate programs.
Further combinations of indicators on the unit are described in the Fault code section 4.3.