User Manual

5/17
Building Technologies Division CC1N7668en
10.11.2017
Standards and certificates
Applied directives:
 Low-voltage directive 2014/35/EU
 Directive for gas-fired appliances 2009/142/EC
 Electromagnetic compatibility EMC (immunity) *) 2014/30/EU
*) The compliance with EMC emission requirements must be checked after the combination gas valve is
installed in the equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:
 Pressure regulators and associated safety devices for gas
appliances
Part 1:
Pressure regulators for inlet pressures up to and including
50 kPa
DIN EN 88-1

Multifunctional controls for gas burning appliances DIN EN 126
 Automatic electrical controls for household and similar use
Part 1:
General requirements
DIN EN 60730-1
The relevant valid edition of the standards can be found in the declaration of
conformity!
Only VGU86S.K0209
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2015
ISO 14001:2015
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
Service notes
Important!
Follow the appliance manufacturer’s service and maintenance instructions!
 Combination gas valves are factory-tested for gas leakage

After any activity in the field (mounting, installation, service work, etc.), make a
safety check including valve proving test
Gas leakage test